Speco Technologies D4RS manual D8RS/D8WRS D16RS/D16WRS, ② Video OUT

Page 17

D8RS/D8WRS

D16RS/D16WRS

Figure 3.2.1. Connectors

VIDEO IN: Video input port.

VIDEO OUT:

D4RS: Switchable (Composite Video Output or Spot Monitor)

D8RS, D16RS: CVBS1 – Composite Video Output / CVBS2 – Spot Monitor

VGA: VGA (Video Graphics Array) output port. Connects to the PC VGA monitor.

RS-232C (for D8RS/D16RS/D8WRS/D16WRS only): For engineering use only, the function is used by a gender through the VGA output.

AUDIO IN: Four connectors for audio input. D8RS/D16RS/D8WRS/D16WRS use an audio cable

AUDIO OUT: One connector for audio output. D8RS/D16RS/D8WRS/D16WRS use an audio cable.

ETHERNET: Network terminal

USB: USB terminal

E-SATA: External SATA port for extension storage.

SENSOR IN, ALARM OUT, RS-485: External sensor terminal, External alarm out terminal & RS-485 for PTZ Camera control

POWER: DC12V input

Cooling fan

17

Image 17
Contents User Guide Ver 16 Channel Digital Video RecorderExplanation of Graphical Symbols These Precautions must be Followed for Safety Reasons D8RS/D16RS/D8WRS/D16WRS Product ComponentsSpecifications GUI Table of Contents Page Appendix E-SATA Connection Main Features Initial Boot up and Basic Time Setup Initial Boot up ProcessSetting Daylight Saving Time Setup System NTP Setup on Setting NTP Network Time ProtocolGMT-8 GMT-7 GMT-6 GMT-5GMT-7 GMT-6 GMT-5 GMT-4Ohio Power ConnectorsName, Function and Connection Front Panel② Video OUT D8RS/D8WRS D16RS/D16WRSRemote Control Setup Main Live Screen Setting up the DVRDescriptio Setup System ModeAccess NTP SetupDate Display FormatSend Email Connection PeriodSite Setup Record ModeFrame Rate ResolutionQuality RecordingRecording Schedules 2. Schedule Recording Setup ScreenSetup Device Mode Alarm-Out 3. Device Mode Setup Screen Keyboard Controller & PTZ SetupSpot Out Motion Sensitivity Motion Zone SetupOSD Setup Display ModeOSD Contrast NameVideo Output D4RS/D4WRS VGA Setup Network ModeSpot Output OFF Spot Output onDdns Network Types DhcpStatic This item allows the user to setup a domain name manually Enable/disable the Dynamic Domain Name ServiceUsing virtual keyboard displays as shown Network Stream1. User Management Setup Screen Setup User Management ModePassword ADMIN, USER1, USER2, USER3Authority PlaybackDisk Format Setup Storage ModeOverwrite Limit Recording Disk InfoLimit Days A.R.TExport to Setup Config ModeUSB ImportLoad DefaultFactory Default Firmware Upgrade Page Live View Live, Search and Playback2. Quick Operation Window RC ALLRecord Alarm OUT SetupAudio SearchPTZ Control Search Screen Digital Zoom in Live and Playback Screen2. Calendar Screen Time Line SearchGo To First Time Event SearchGo To Last Time Go To Specific TimeLog List Archive ListButton Description Play ModeBack Up Still Image Backup onto USB Flash DriveVideo Backup onto USB Flash Drive Page Transferring Still Images or Video from the Archive List 1. Archive Search Screen Playback of Backup VideoPC Requirements Network Access Using the Multi-Sites Network ViewerOverview Installation of the Program Main User Interface Control Buttons Live WindowLocal Playback Remote PlaybackPRESET/TOUR/SCAN/MENU Alarm onSite Management ConnectMain Control Panel Search and Playback Window Main User InterfaceMark OUT Backup AudioMark General Setup of SpecoTech Multi ClientEvent Record About DisplayRemote Setup System Record Device Display Network Type Network Shows the current Firmware version installed on DVR Remote UpgradeStorage BuzzerDeleting a Site Modify of Sites Disconnect Connect and DisconnectStill-image Capture During Live Recording Video on Local PC During Live Page Playback of Recorded Video on Remote DVR AVI Backup during Playback Page Network Access Using the Web-Browser Viewer Page App Viewer for iPhone Network Access Using the Smart Phone ViewerPage App Viewer for Android Phone Page Appendix Network Connection LAN Page Appendix Network Connection Internet and Ddns Http//d4rs.ddns.specoddns.net Setupsystemdescriptionddns StatusSpecific router model Page Appendix E-SATA Connection