4-9-1. Firmware Upgrade
1.Create a new folder named “upgrade” in the USB flash drive root directory.
2.Create
∙D4RS: “main_D4RS_speco_*.*.*_201****”
∙D8RS: “main_D8RS_speco_*.*.*_201****”
∙D16RS: “main_D16RS_speco_*.*.*_201****”
∙D4WRS: “main_D4WRS_speco_*.*.*_201****”
∙D8WRS: “main_D8WRS_speco_*.*.*_201****”
∙D16WRS: “main_D16WRS_speco_*.*.*_201****”
3.Plug in the USB flash drive on the rear panel.
4.Navigate to CONFIG menu of SETUP.
5.Select SOFTWARE UPGRADE.
6.Follow the procedure from Figure 4.9.2 to Figure 4.9.4.
Figure 4.9.2
41