Speco Technologies D4RS, D16RS, D8RS manual Appendix E-SATA Connection

Page 94

APPENDIX: E-SATA CONNECTION

Please read the following instructions before using the E-SATA port. Failure to do so may cause serious damage to the recorded video.

SPECO is not responsible for data loss caused by improper usage.

Use ONLY a new HDD or a HDD that is pre-formatted on a PC.

Turn off the DVR before plugging the E-SATA HDD.

DO NOT disconnect the E-SATA port while the DVR power is on.

The purpose of the E-SATA port is to extend recording capacity.

Once connected, DO NOT remove or disconnect the E-SATA port from the DVR.

The E-SATA port does not support the hot swappable function.

94

Image 94
Contents 16 Channel Digital Video Recorder User Guide VerExplanation of Graphical Symbols These Precautions must be Followed for Safety Reasons Product Components D8RS/D16RS/D8WRS/D16WRSSpecifications GUI Table of Contents Page Appendix E-SATA Connection Main Features Initial Boot up Process Initial Boot up and Basic Time SetupSetting Daylight Saving Time Setting NTP Network Time Protocol Setup System NTP Setup onGMT-7 GMT-6 GMT-6 GMT-5GMT-8 GMT-7 GMT-5 GMT-4Ohio Name, Function and Connection ConnectorsPower Front PanelD8RS/D8WRS D16RS/D16WRS ② Video OUTRemote Control Setting up the DVR Setup Main Live ScreenSetup System Mode DescriptioDate Display SetupAccess NTP FormatConnection Period Send EmailSetup Record Mode SiteQuality ResolutionFrame Rate Recording2. Schedule Recording Setup Screen Recording SchedulesSetup Device Mode Alarm-Out Keyboard Controller & PTZ Setup 3. Device Mode Setup ScreenSpot Out Motion Zone Setup Motion SensitivityOSD Contrast Setup Display ModeOSD NameSpot Output OFF Setup Network ModeVideo Output D4RS/D4WRS VGA Spot Output onStatic Network Types DhcpDdns Using virtual keyboard displays as shown Enable/disable the Dynamic Domain Name ServiceThis item allows the user to setup a domain name manually Network StreamSetup User Management Mode 1. User Management Setup ScreenAuthority ADMIN, USER1, USER2, USER3Password PlaybackOverwrite Setup Storage ModeDisk Format Limit Days Disk InfoLimit Recording A.R.TUSB Setup Config ModeExport to ImportFactory Default DefaultLoad Firmware Upgrade Page Live, Search and Playback Live ViewRC ALL 2. Quick Operation WindowAudio SetupRecord Alarm OUT SearchPTZ Control Digital Zoom in Live and Playback Screen Search ScreenTime Line Search 2. Calendar ScreenGo To Last Time Event SearchGo To First Time Go To Specific TimeArchive List Log ListPlay Mode Button DescriptionVideo Backup onto USB Flash Drive Still Image Backup onto USB Flash DriveBack Up Page Transferring Still Images or Video from the Archive List Playback of Backup Video 1. Archive Search ScreenOverview Network Access Using the Multi-Sites Network ViewerPC Requirements Installation of the Program Local Playback Live WindowMain User Interface Control Buttons Remote PlaybackSite Management Alarm onPRESET/TOUR/SCAN/MENU ConnectSearch and Playback Window Main User Interface Main Control PanelMark Backup AudioMark OUT Setup of SpecoTech Multi Client GeneralEvent Record Display AboutRemote Setup System Record Device Display Network Network TypeStorage Remote Upgrade Shows the current Firmware version installed on DVR BuzzerDeleting a Site Modify of Sites Connect and Disconnect DisconnectStill-image Capture During Live Recording Video on Local PC During Live Page Playback of Recorded Video on Remote DVR AVI Backup during Playback Page Network Access Using the Web-Browser Viewer Page Network Access Using the Smart Phone Viewer App Viewer for iPhonePage App Viewer for Android Phone Page Appendix Network Connection LAN Page Appendix Network Connection Internet and Ddns Setupsystemdescriptionddns Status Http//d4rs.ddns.specoddns.netSpecific router model Page Appendix E-SATA Connection