Speco Technologies D16RS, D4RS, D8RS manual Alarm-Out

SENSITIVITY	Control the motion sensitivity from 1 to 9.
	(9 – Highest sensitivity, 1 – Lowest sensitivity)
KEY TONE	Enable/disable key tone.
REMOTE	Set the remote control ID.
CONTROL ID	1. Select ID.
	2. Input the remote control ID number.
	3. An icon will indicate on the Live Screen if the remote control ID is
	synchronized.
	The options are from 0 to 99
SENSOR	Select the type of each sensor.
	Option is Off, Normal Open or Normal Close.

4-4-1. Alarm-Out

	Figure 4.4.2. ALARM-OUT Setup Screen
	Table 4.4.2. Item for ALARM-OUT Setup Screen
Item	Description
ALARM OUT	Only one Alarm-out is available.
SENSOR IN	Sensor input from 1 to 4.
MOTION ON	Camera motion detection from 1 to 4.
VIDEO LOSS ON	Camera video loss detection from 1 to 4.
ALARM DURATION	Set alarm dwell time from 5 to 60 seconds.
ERROR ALARM	Set the error type for the alarm activation. The options are
	OFF, ALL, HDD ERROR and VIDEO LOSS.

27