5-1-1. PTZ Control
Table 5.1.3. Menu Items in PTZ Control Window
Item | Description |
|
|
INITIALIZE | Initialize the PTZ settings of the selected camera |
|
|
PAN/TILT | Select PAN/TILT using the ▲▼◀ and ▶button, |
| then |
| press SEL. Adjust the tilt (UP/DOWN)/pan |
| (LEFT/RIGHT) position using the ▲▼◀and ▶ |
| buttons. |
ZOOM/FOCUS | Select ZOM/FOCUS using the▲▼◀ and ▶ |
| buttons, then press SEL. Adjust the zoom |
| (UP/DOWN)/ focus (LEFT/ |
| RIGHT)position using the ▲▼◀ and ▶ buttons. |
|
|
OSD | Select OSD to enter the menu. Control keys are |
| Right, Left, UP, Down, Select, Far (REW KEY), and |
| Near (FF KEY). Press the ESC button to return to |
| the previous menu. Press the PTZ button to close |
| the OSD menu. |
|
|
AUTOSCAN | Press the right key(▶) to start auto scan. Press the |
| left key (◀) to stop auto scan. |
|
|
PRESET | Select PRESET, then press the left key(◀). A |
| number input window will appear. Set the number |
| (3digits) using the number key, then press the SEL |
| to confirm the preset number for the current position. |
| Press the right key (▶) and enter the number |
| (3digits) to go to the preset position. |
TOUR | Select TOU and press the right (▶) key. A number |
| input window will open. Select a number (1digit) |
| using a number key, then press SEL to start the tour. |
| Press the left (◀) key to stop the tour. |
| Preset the number of the tour group in the OSD |
| menu. |
NUMBER | For the TOUR and PRESET menu. |
|
|
| Press ESC to return to the main menu |
|
|
46