Palsonic HDSTB100 Channel and Program Selection, Making use of Program List to select program

Chapter 4: Operations SpeProgram Search/Channel & Program selection

Manual Search

If desired programs can not be searched, you can make use of Manual Search.

1	Press MENU button to access the menu mode.
2	Press	button to select and highlight Program.
3	Press ENTER button to enter into the Program menu.
4	Press	button to highlight Manual SRCH.

Program	Quick SRCH
System
	Auto SRCH
Password
	Manual SRCH
Time

5	Press ENTER button to enter into Manual search sub-menu.
6	Highlight CH NO. and press ENTER. Use	button to move the
	cursor rightward or leftward and use	button to select

number (or directly input the number by digit buttons), then press ENTER. Be sure you know the channel number.

(You can refer to Digital TV channel table on page 19).

Program

System

Password

Time

Quick SRCH

Auto SRCH

Manual SRCH

Manually Enter Channels
CH No	08
Freq.
	OK
Searching...

7	Move the highlight to OK and press ENTER.
	Now it starts searching.
	Note: Normally it is unnecessary to input the frequency value. However, if you want to input the
	frequency, you can highlight Freq., then make use of ENTER,	,	0-9 digit buttons to input.

Channel and Program Selection

Channel and program selection in digital television is very different from current conventional television. In DTV, multiple programs can exist within a single 7 MHz channel. These programs behave as sub-channels within the single channel. When tuning to a channel, the STB will also tune to a program. Your STB will indicate the channel and program through the On-Screen Display.

The STB allows channel and program selection in the following ways:

Direct select (0-9 keys) - Directly selects a channel or program.

Program up/down select (PROGRAM+/PROGRAM- buttons ) - Select the next or previous available channel or program.

Making use of Program List to select.

Making use of Program List to select program

1	Press LIST button to call up Program List.
2	Press navigation buttons (	) to select and press ENTER to confirm, then the desired program is
	selected.
			Note: the shown
			information is only
			served as an illustration
			and may differ from the
			actual ones.

14