Palsonic HDSTB100 owner manual 16 PIP/VCR, PIP control buttons

Chapter 2: Introduction Remote control functional key list

16

17

16 PIP/VCR	Switch between PIP and VCR for the secondary
	program display.

Note: For PIP output or VCR output, you can only select one output at the same time. If PIP is selected, then VCR can not be selected; If VCR is selected, then PIP can not be selected. You can press PIP/VCR button to toggle and select one mode you desire.

17PIP control buttons

ON/OFF: to turn on/off PIP function.

POS.: to select PIP position.

PR+/-:to select next/previous program for PIP.

SWITCH: to swap the main and sub-pictures if the secondary display is at PIP status. Or to switch VCR program to main screen display and main program to VCR if the secondary display is at VCR status.

LIST: to display PIP (or VCR) program list.

Note: when pressing PIP/VCR and PIP control buttons, within 5 seconds after corresponding OSD disappear, if you press digit buttons, DSP, ASPECT, VOLUME+/-, MUTE buttons, it will affect PIP picture (or VCR picture). After 5 seconds, it will affect main picture.

6