Password setup, Clear password, Lock Settings

Chapter 4: Operations	LOCK Settings

Password setup

The Rating Control lets you set up specific channels and ratings through blocking schemes. To activate or disable all of the lock schemes previously set up, a password is required to gain access to this menu. You can change the password by inputting a new password twice.

1	Press MENU button to access the menu mode.
2 Press		button to select and highlight Password.
3	Press ENTER button to enter into the Password menu.
4	Press	button to highlight PWD Setup. Press ENTER to
	enter into the next level.

When you have not set a password yet;

Enter a password using the numbered buttons to create a personal 4-digit security password.

When you have already set a password and you want to change it;

Enter the old password, then input a 4-digit new password using the numbered buttons and confirm again.

	Program	Rating CTRL
	System
		PWD Setup
	Password
		Clear PWD
	Time

Program	Rating CTRL
System	PWD Setup	Set Password
Password	PWD Setup	Set Password
Password	Clear PWD
Time

Confirm Password

Input Password

Note:

There is no preset password in this STB, therefore when you use this STB at the first time, you may create a password by yourself if required.

Clear password

If you want to clear the password, please do the following steps:

1	Enter into the Password sub-menu.
2	Press	button to select and highlight Clear PWD. Press
	ENTER to enter into the next level.
	Now a dialogue box appears asking you to input the old
	password.
3	Input the old password correctly. Now a dialogue box "Sure to
	clear password?" appears. Select Yes and press ENTER.

Program	Rating CTRL
System	PWD Setup	Press Enter key to Clear
Password	Clear PWD	Press Enter key to Clear
Password	Clear PWD
Time

4 Now the password is cleared.

Chapter 4: Operations

LOCK Settings

Password setup

When you have not set a password yet;

Clear password