Palsonic HDSTB100 owner manual Default Setup, Audio Setup/Default Setting, Stereo Output

Chapter 4: Operations Audio Setup/Default Setting

Audio Setup

You can choose different audio outputs in Audio Setup menu. The STB includes standard audio mode options such as stereo or mono sound to match the broadcast signal or your home entertainment stereo system. Other audio mode options may be supported by your service provider or TV broadcaster, such as selecting alternate languages, or different commentators for sport events.

1	Press AUDIO button to access the Audio Setup menu.
2	Press	button to move the highlight upward or downward.
3	Press ENTER button to select sub-audio.
	You can select different audio output systems for Primary Audio
	and Secondary Audio.

Default Setup

Making use of Default function, you can restore all settings to the factory settings.

1 Enter into System menu and select Default.

2 Press ENTER button to enter into the sub-menu and then press ENTER button to confirm.

3	If you have set a password in Password Sub-menu, then a
	dialogue box appears asking you to input a password.
4	Input the password correctly. After inputting, a dialogue box
	"Sure to restore settings" pops up.
5	Highlight Yes and press ENTER button if you want to restore all
	settings to the factory settings.

If not, highlight No and press ENTER.

Note: as regards to password information, please refer to page 17 for details.

There is no preset password in this STB.

Audio Setup (MAIN)

Only 1 Audio (MPEG2)

STEREO OUTPUT

Press enter to set audio Ch.

Program	Default
System

Password

Time

Program	Default
System
Password	Press Enter Key to restore
Time
	the factory settings

Restore Defaults

Input Password

Sure to restore settings

Yes No

16