Hughes & Kettner 100, 50, 96 manual Service and Preventive Maintenance, Selecting Channels

Page 4

4

3. STANDARD SETUP/CABLE CONNECTIONS

4. OPERATING THE EDITION BLUE-R

4.1 SELECTING CHANNELS

Use the CHANNEL SELECT switch or an external footswitch (30/60-R) to change channels.

Note: Before using a footswitch, set the CHANNEL SELECT switch on the front panel of the amp to the CLEAN position.

4.2 THE EDITION BLUE-R AND CD PLAYERS

The EDITION BLUE-R is equipped with a CD/TAPE INPUT located on the rear panel for the connection of a CD player or another audio source (tape deck, DAT recorders). The circuit is controlled directly by the MASTER circuit of the EDITION BLUE-R, which means that you can use the MASTER knob to adjust the input signal’s volume. To dial in the desired balance of levels for the playback and guitar signals, the connected playback device has to be equipped with some type of variable output control.

Tip: Most audio playback devices feature a variable headphones out. Using a corresponding adapter, you can connect it to the CD/TAPE INPUT.

Note: Before you switch on the audio playback device, turn the MASTER knob all the way down. Then turn up the MASTER knob a tad and dial in the desired balance levels. Once you’re satisfied with these levels, gradually turn up the knob to the the desired overall level.

4.3 THE EDITION BLUE-R AND SIGNAL PROCESSORS (only 60-R)

The effects loop on the EDITION BLUE-R is a serial effects loop, meaning that the entire preamp signal is routed to the FX device and processed there.

To connect a signal processor:

Connect the processor‘s INPUT to the EDITION BLUE-R LINE OUT jack and the processor‘s OUTPUT to the EDITION BLUE-R LINE IN jack.

To avoid noise, signal degradation, and interrupted signals, only use high-quality patch cables.

Make sure the processor is not distorting the signal. Check the processor's gain LEDs (if it is equipped with this type of display) and use the input and output controls to dial in a suitable level.

Distortion devices are not designed for use in an FX loop. As a rule of thumb, any kind of device that compresses the signal should be connected first in the signal chain. Depending on the type of effect you want to achieve, you may want to connect your compressor directly between the instrument and the amp's input.

If you are using several processors or stomp boxes, ensure you connect them in the proper order.

4.4 THE EDITION BLUE-R AND MIXING CONSOLES(60-R only)

If you want to feed the EDITION BLUE-R's signal to a mixing console, we recommend you route it through a Hughes & Kettner RED BOX. Patch the signal from the LINE OUT jack, as this signal path's level is not influenced by the MASTER setting. The RED BOX balances the signal and simulates a speaker cabinet.

5. SERVICE AND PREVENTIVE MAINTENANCE

The EDITION BLUE-R does not require service of any type. However, there are a few precautions you should heed to ensure your amp lasts for many years.

Ensure all peripheral devices, cords and cables are in a state of good repair. Defective speaker cables are the most common cause of power amp failure. Poor-quality cables will cause hum and undesirable noise.

Make certain your amp's ventilation ducts are not blocked or covered. Proper cooling will prolong the life of your amp.

Avoid mechanical shocks and exposure to extreme heat, dust and especially moisture.

When connecting peripheral devices, always pay close attention to their specifications. Never connect devices with high output signal levels (e.g. power amps) to your amp's input.

Ensure you have the correct AC power rating available before you plug in the amp. If in doubt, ask the venue's sound technician or the custodian of the building you are rehearsing in.

Refrain from do-it-yourself repairs! Have a qualified service technician replace internal fuses.

With the unit off and unplugged, use a soft damp cloth to clean

the exterior surface of the EDITION BLUE-R.

Edition Blue 15/30/60-R

Image 4
Contents Edition Blue-R Before Powering UP Troubleshooting Technical SpecificationsWe wish you a lot of fun and success with your new Edition BLUE-RJacks and Control Features ChannelsSelecting Channels Service and Preventive MaintenanceEdition BLUE-R and Mixing CONSOLES60-R only Troubleshooting Technical SpecificationsFEHLERBESEITIGUNG/TROUBLESHOOTING Wir freuen uns, dass Du Dich für einenHughes & Kettner Edition BLUE-R Amp entschieden hastDIE Kanäle DES Edition Blue -R Anschlüsse UND BedienelementeStandard SET UP / Verkabelung Wartung UND ServiceBedienung DES Edition BLUE-R DAS Anwählen DER KanäleMögliche Fehlerquellen Technische Daten¡Le deseamos mucho éxito con su Edition BLUE-R Edition BLUE-R de Hughes & KettnerAntes DE LA Puesta EN Marcha Headphones LOS Canales DEL Edition BLUE-RAcometidas Y Elementos DE Manejo Control DE TonoManejo DEL Edition BLUE-R Mantenimiento Y ServicioLA Seleccion DE LOS Canales EL Edition BLUE-R EN LA Mesa DE Mezclas solamente 60-RDeteccion Y Supresion DE ERRORES/ Troubleshooting Datos TécnicosService ET Entretien Depistage DES Pannes Caracteristiques Avant LA Mise EN FonctionRaccords ET Elements DE Commande LES Canaux DE L’EDITION Blue -RLead LED Rouge Reglage DE SonoritéStandard SETUP/CABLAGE Entretien ET ServiceManiement DE L’EDITION BLUE-R Ledition Blue -R Avec Lecteur DE-CDDepistage DES Pannes Caracteristiques TechniquesCongratulazioni e grazie per aver scelto DI Utilizzare LO StrumentoCaratteristiche DEI Jack E DEI Controlli Collegamento DEI CaviFootswitch esclusivamente 30/60-R CanaliLine OUT esclusivamente 60-R Line in esclusivamente 60-RUtilizzare Ledition BLUE-R Assistenza E Manutenzione PreventivaSelezionare I Canali Ledition BLUE-R E I Mixer esclusivamente 60-RSoluzione DEI Problemi Caratteristiche TecnicheUnited states Deutsch Abb.1Abb.2Diagram English EspañolIllustrazione AvertissementEdition Blue-R 15/30/60 Edition Blue 15/30/60-R Page Fax +49 68 51 905 200 hkinternational@hughes-and-kettner.com

96, 100, 50 specifications

Hughes & Kettner is a renowned name in the world of guitar amplification, and their series of amplifiers such as the 50, 100, and 96 models showcase the company's dedication to sound quality and innovation. These amplifiers are designed to meet the diverse needs of guitar players, offering a range of features that cater to both live performances and studio recording.

The Hughes & Kettner 50 model is a versatile powerhouse, delivering 50 watts of tube-driven tone that is perfect for both practice and performance. Its compact design makes it highly portable, yet it still packs a punch with its dynamic range and tonal versatility. The 50 features a classic-style control panel, allowing users to easily dial in their desired sound. Its clean channel provides a warm, rich tone, ideal for a variety of genres, while the gain channel allows for a gritty overdrive that brings out the harmonic richness of distorted tones.

Stepping up, the Hughes & Kettner 100 model offers 100 watts of power, making it a formidable choice for larger venues. This amp is equipped with advanced tone-shaping capabilities, including multiple ECC83 and EL34 tubes that provide unparalleled warmth and responsiveness. The 100 model also features a built-in reverb and effects loop, enabling players to integrate their favorite pedals and effects seamlessly into their rig. With its sturdy construction, this amplifier is built to withstand the rigors of touring.

Finally, the Hughes & Kettner 96 model is designed with cutting-edge technology, featuring a digital modeling system that allows players to access a vast array of tones and effects. This amp provides the flexibility of emulating classic amplifiers while also offering modern digital conveniences. The 96 incorporates an intuitive user interface, allowing for easy navigation between settings. Additionally, it features USB connectivity, making it perfect for recording directly into a DAW or for re-amping sessions.

Overall, the Hughes & Kettner 50, 100, and 96 models exemplify the brand’s commitment to quality and innovation. With robust construction, powerful sound capabilities, and modern technology, these amplifiers are ideal for any guitarist seeking to enhance their sound, whether they are practicing at home or performing on stage. Each model embodies the perfect balance between traditional craftsmanship and modern advancements, making them a staple in the collection of aspiring and professional musicians alike.