Motorola DCT1800 Upstream Modem Starvue II Diagnostics, Ippv, Enabled, Unsent, Disabled

DiagnosticsB-17

d 09: Upstream Modem (STARVUE II Diagnostics)

This diagnostic shows the status and operating parameters for the STARVUE II RF return.

Figure B-10

STARVUE II Diagnostic

09STARVUE II DIAGNOSTICS

STATUS:DISABLED

FREQUENCY:	23.000 MHz
LEVEL:	39
IPPV:	DISABLED
LAST POLL REQ:	170
6-15-2001 20:49:33
LAST POLL ACK:	170
6-15-2001 20:49:33

Table B-11

STARVUE II Transmitter Fields

Field	Description
Status	Indicates the transmitter status with the following variables:
	-	Idle
	t	Transmitting
Frequency	Indicates the transmitting frequency.
Level	Indicates the approximate power value of the STARVUE II transmitter in dBmV. The
	difference between the power value on the diagnostic screen and the actual power of
	the STARVUE II module may be ± 5 dBmV.
IPPV	Indicates the Interactive Pay-Per-View status with the following variables:
	ENABLED	IPPV enabled
	UNSENT −	The set-top contains unsent IPPV transactions. The variable −## is the
	##	number of unsent transactions.
	DISABLED	IPPV disabled

Last Poll Req. Indicates the sequence number of the last poll request received by the set-top. The time stamp of the last poll request is displayed under LAST POLL REQ:

!If the set-top has received no poll request, , the sequence number and time stamp fields display N/A.

!If the set-top has received a poll request set-top but its system time has not yet been initialized, the time stamp field displays NOT AVAILABLE.

Last Poll Ack. Indicates the sequence number of the last poll acknowledge received by the set-top. The time stamp of the last poll acknowledge is displayed under LAST POLL ACK.

!If the set-top has received no poll acknowledge, the sequence number and time stamp fields display N/A.

!If the set-top has received a poll acknowledge but its system time has not yet been initialized, the time stamp field displays NOT AVAILABLE.

DCT1800 Installation Manual