Marantz CD Recorder, CDR310 manual Important Safety Instructions

Page 3

IMPORTANT SAFETY

INSTRUCTIONS

READ BEFORE OPERATING EQUIPMENT

This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operation precautions which you should be particularly aware of.

1.Read these instructions.

2.Keep these instructions.

3.Heed all warnings.

4.Follow all instructions.

5.Do not use this apparatus near water.

6.Clean only with dry cloth.

7.Do not block any ventilation openings. Install in accordance with the manufacture’s instructions.

8.Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9.Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has

two blades with one wider than the other. A grounding type plug has two blades and a

third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet,

consult an electrician for replacement of the obsolete outlet.

10.Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11.Only use attachments/accessories specified by the manufacturer.

12.Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13.Unplug this apparatus during lightning storms or when unused for long periods of time.

14.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Additional Safety Information!

This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.

Apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.

The AC adaptor shall be installed near the Socket-Outlet and shall be easily accessible.

NOTE TO CATV SYSTEM INSTALLER:

This reminder is provided to call the CATV (Cable-TV) system installer's attention to Article 820-40 of the NEC, which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

NOTE:

Changes or modifications may cause this unit to fail to comply with Part 15 of the FCC Rules and may void the user's authority to operate the equipment.

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la Classe B est conforme á la norme NMB-003 du Canada.

Image 3
Contents Model CDR310 User Guide Laser Safety Important Safety Instructions Nederlands EnglishFrançais DeutschTable of Contents Introduction FeaturesPackage contents Quick Start Guide Setup the power supply P.XXAlways keep the disc surface clean About DiscsPlayable discs Top side Names and Functions2F.REV 5 button 4CANCEL button9REC Indicator 1MENU/STORE buttonRear side Front sideRight side Display AC adaptor connection Using batteriesGuide to battery lifespan Preparations Before UseSafety cautions on handling batteries Installing an optional Ni-Cd or Ni-MH batteryCharging the optional Ni-Cd battery Basic Operations Power on/offBattery type settings Default value AlkalineThere is not enough battery power remaining to Battery remaining indicatorWhen DateForm M/D/Y Setting the clockDefault value 12H Date form settingsTime form settings Default value M/D/YDate/Time Menu SettingsInput RecFormat CD Split Default MENU/STORE ButtonInput P.xx Preset menuMenu operation Schematics Recording to the HDBasic operations for recording Formatting the HD Erasing recordingsDetailed Settings for HD Recording Input source settingsDefault value Preset1 MIC Preset2 MIC Preset3 MIC When the channel setting is Stereo Recording format settingsPage Recording level control settings Operations when manual control is set Microphone attenuator Default value Preset1 OffDefault value Preset1 Off Preset2 Off Preset3 Off Phantom power settingsPrerecord Default value Preset1 Off Preset2 4 sec Preset3 4 secBackground recording Silent skip Default valueManual track Default value Preset1 On Preset2 On Preset3 OnAuto track CD Burning Page CD Split Basic operations for playback Playing Back HD DataFast reverse Track accessSearch Audible searchYou can select the playback mode from the following 4 modes Playback mode settingsPlaying Back CDs CD PlaybackVarious CD playback operations Default value On Auto power off settingsBeep sound alarm setting Default value Off / 15 minWhen in HD recording or recording paused status Switching the display modeWhen the HD is stopped When CD is stoppedWhen in HD/CD playback or playback paused status Key lock settings Stop Monitor settingsMicrophone remote connection Various remote functionsInitialization of preset settings Margin displayCD-TEXT, ID3 tag Troubleshooting Error Messages Specifications Limitation of Implied Warranties Non-transferable warrantyHow You Can Get Service Americas only What We Will Pay ForHoldings Inc