Marantz CD Recorder, CDR310 Other Functions, Auto power off settings, Beep sound alarm setting

Page 45

Other Functions

Auto power off settings

If there are no operations for the set amount of time while the recorder is stopped or playback is paused, the power is automatically turned off.

Before the power turned off, the beep sound can be heard for

xxseconds through the speakers or headphones. This function is used to conserve battery power.

< Default value > Off / 15 min

1 While the recorder is stopped, press the MENU/STORE button.

2 Turn the JOG to select “A.Pow Off” and press the JOG.

3 Turn the JOG to select function On/Off, and press the JOG.

4 If this function is activated turn the JOG to select the automatic power off (5, 10, 15, 30 minutes) and press the JOG.

5 Press the MENU/STORE button to register the settings.

Beep sound (alarm) setting

If there are no operations performed for the set amount of time for auto power off while the recorder is stopped or playback is paused, the beep sound can be heard.

The beep sound can be heard through the speakers or headphones.

The beep sound that occurs when the remaining battery power is low can be heard through the headphones even if the recorder volume is set to minimum.

< Default value > On

1 While the recorder is stopped, press the MENU/STORE button.

2 Turn the JOG to select “Beep” and press the JOG.

3 Turn the JOG to select function On/Off, and press the JOG.

4 Press the MENU/STORE button to register the settings.

41

Image 45

Contents Model CDR310 User Guide Laser Safety Important Safety Instructions Français EnglishDeutsch NederlandsTable of Contents Introduction FeaturesPackage contents Quick Start Guide Setup the power supply P.XXAlways keep the disc surface clean About DiscsPlayable discs Top side Names and Functions9REC Indicator 4CANCEL button1MENU/STORE button 2F.REV 5 buttonRear side Front sideRight side Display Guide to battery lifespan Using batteriesPreparations Before Use AC adaptor connectionSafety cautions on handling batteries Installing an optional Ni-Cd or Ni-MH batteryCharging the optional Ni-Cd battery Battery type settings Power on/offDefault value Alkaline Basic OperationsThere is not enough battery power remaining to Battery remaining indicatorWhen DateForm M/D/Y Setting the clockTime form settings Date form settingsDefault value M/D/Y Default value 12HInput RecFormat CD Split Default Menu SettingsMENU/STORE Button Date/TimeInput P.xx Preset menuMenu operation Schematics Recording to the HDBasic operations for recording Formatting the HD Erasing recordingsDetailed Settings for HD Recording Input source settingsDefault value Preset1 MIC Preset2 MIC Preset3 MIC When the channel setting is Stereo Recording format settingsPage Recording level control settings Operations when manual control is set Microphone attenuator Default value Preset1 OffDefault value Preset1 Off Preset2 Off Preset3 Off Phantom power settingsPrerecord Default value Preset1 Off Preset2 4 sec Preset3 4 secBackground recording Silent skip Default valueManual track Default value Preset1 On Preset2 On Preset3 OnAuto track CD Burning Page CD Split Basic operations for playback Playing Back HD DataSearch Track accessAudible search Fast reverseYou can select the playback mode from the following 4 modes Playback mode settingsPlaying Back CDs CD PlaybackVarious CD playback operations Beep sound alarm setting Auto power off settingsDefault value Off / 15 min Default value OnWhen the HD is stopped Switching the display modeWhen CD is stopped When in HD recording or recording paused statusWhen in HD/CD playback or playback paused status Key lock settings Stop Monitor settingsMicrophone remote connection Various remote functionsInitialization of preset settings Margin displayCD-TEXT, ID3 tag Troubleshooting Error Messages Specifications How You Can Get Service Americas only Non-transferable warrantyWhat We Will Pay For Limitation of Implied WarrantiesHoldings Inc