Marantz CDR310, CD Recorder manual Introduction, Features

Page 6

Introduction

Thank you for purchasing this CDR310 CD Recorder.

Before using the CD recorder, make sure that you read through this instruction manual carefully to fully understand the device’s functions and how to operate them. We hope that you will continue to enjoy using the recorder for a very long time. After reading this manual, please keep it in a safe, easy to reach place for future reference.

Features

You can record audio from an external microphone onto the internal HD (Hard Disk), and then burn the audio onto a CD-R.

Audio input

Condenser microphone or dynamic microphone (XLR balanced input) connected to the MIC IN jack

Internal microphone

Line level audio source connected to the LINE IN jack

Digital input (Coaxial input)

Phantom power supply

L/R independent attenuator for external microphone input or internal microphone input

4 different types of recording format (MP3, WAVE, CD-DA, AIFF)

Compressed sound recording uses MPEG1 Layer III (MP3) monaural and stereo recording.

MP3 are compressed to 128kbps (stereo) or 64kbps (monaural).

Non-compressed sound recording uses 16-bit linear pulse code modulation (PCM).

Simple recording

You can start simple recording to the HD just by pressing the REC button once. The HD capacity is 1.5GB. (Approx. 2 hours in PCM recording)

You can create an extended play recorded CD (maximum 25 hours 29 minutes on a 700MB CD-R disc in MP3 mono format).

Simple CD creation

You can burn data recorded on the HD onto a CD-R just by pressing the MAKE CD button.

Convenient special recording functions

Pre-code cache

(XX)

Background recording (XX)

Silent skip

(XX)

Auto track

(XX)

Manual track

(XX)

Recording level and LR balance adjustment (XX)

Automatic recording level control (ALC)

Manual control

You can record and playback audio in stereo (2 channel) or monaural (1 channel).

You can play back CD-DA and Data CD (MP3, AIF, WAV).

The following sound outputs are available.

Internal speakers

Headphones connected to the headphone (PHONES) jack

Amp or other analog audio devices connected to the LINE OUT jack.

Digital output

2 types of power supply source

Use the provided AC adaptor.

Use alkaline batteries, the optional Nickel-Cadmium battery (RB1100), or the optional Nickel-Metal Hydride battery (RB1650).

2

Image 6
Contents Model CDR310 User Guide Laser Safety Important Safety Instructions Deutsch EnglishFrançais NederlandsTable of Contents Features IntroductionPackage contents Setup the power supply P.XX Quick Start GuideAlways keep the disc surface clean About DiscsPlayable discs Names and Functions Top side1MENU/STORE button 4CANCEL button9REC Indicator 2F.REV 5 buttonFront side Rear sideRight side Display Preparations Before Use Using batteriesGuide to battery lifespan AC adaptor connectionSafety cautions on handling batteries Installing an optional Ni-Cd or Ni-MH batteryCharging the optional Ni-Cd battery Default value Alkaline Power on/offBattery type settings Basic OperationsBattery remaining indicator There is not enough battery power remaining toSetting the clock When DateForm M/D/YDefault value M/D/Y Date form settingsTime form settings Default value 12HMENU/STORE Button Menu SettingsInput RecFormat CD Split Default Date/TimePreset menu Input P.xxMenu operation Schematics Recording to the HDBasic operations for recording Erasing recordings Formatting the HDDetailed Settings for HD Recording Input source settingsDefault value Preset1 MIC Preset2 MIC Preset3 MIC Recording format settings When the channel setting is StereoPage Recording level control settings Operations when manual control is set Default value Preset1 Off Microphone attenuatorPhantom power settings Default value Preset1 Off Preset2 Off Preset3 OffDefault value Preset1 Off Preset2 4 sec Preset3 4 sec PrerecordBackground recording Default value Silent skipDefault value Preset1 On Preset2 On Preset3 On Manual trackAuto track CD Burning Page CD Split Playing Back HD Data Basic operations for playbackAudible search Track accessSearch Fast reversePlayback mode settings You can select the playback mode from the following 4 modesPlaying Back CDs CD PlaybackVarious CD playback operations Default value Off / 15 min Auto power off settingsBeep sound alarm setting Default value OnWhen CD is stopped Switching the display modeWhen the HD is stopped When in HD recording or recording paused statusWhen in HD/CD playback or playback paused status Stop Monitor settings Key lock settingsVarious remote functions Microphone remote connectionInitialization of preset settings Margin displayCD-TEXT, ID3 tag Troubleshooting Error Messages Specifications What We Will Pay For Non-transferable warrantyHow You Can Get Service Americas only Limitation of Implied WarrantiesHoldings Inc