CD Split

When copying the HD data to CD-R disc, the recording method for the final track when all of the data will not fit onto 1 CD is set in the CD Split function.

•CD Split On Setting

This setting uses all of the unused space on a CD-R disc to save data.

This enables the effective use of disc space, and reduces the number of discs required. Also, when creating a CD with data from a meeting, etc., a 30 second overlap of the beginning and end contents is burned to make it easier to understand the context.

HD Data	001.wav	002.wav		003.wav

First CD-R	Track 1	Track 2

Second CD-R			Track 1	Track 2

30 sec of overlap

If track 001 and only part of track 002 can be saved to the first CD-R as shown in the diagram above, track 001 and part of track 002 are saved to the first disc. Then, the remainder of track 002 that could not be saved onto the first disc is saved onto the second disc, starting 30 seconds before the track cut off on the first disc.

•CD Split Off Setting

The final track that could not fit onto the first CD-R is not saved to the first CD-R, but is saved from the beginning of the track onto the second CD-R.

Unused space remains on the disc, but it is easier to play back these tracks because only complete tracks exist on the same disc.

If a track with a file size larger than the capacity of the disc is being burned to disc, CD Split Off becomes invalid, and the track is cut midway.

If the file size of the next track is small, CD Split Off becomes valid again.

HD Data	001.wav	002.wav		003.wav

1st CD-R	Track 1

2nd CD-R			Track 1		Track 2

If only track 001 and part of track 002 can be saved onto the first CD-R as shown in the diagram above, track 001 is saved onto the first CD-R, and track 002 is saved from the start onto the second CD-R.

It is convenient to use auto track. (☞ P.XX)

Creating tracks with the desired time interval increases the efficiency with which discs are used.

If you do not wish to create many tracks, you can create a disc with one CD-sized track by setting the capacity of the disc being used.

<Default value > Preset1 : On Preset2 : On Preset3 : On

1 While the recorder is stopped, press the MENU/STORE button.

2 Turn the JOG to select “Preset” and press the JOG.

3 Turn the JOG to select the preset number that you wish to set, and press the JOG.

4 Turn the JOG to select “CD Split” and press the JOG.

5 Turn the JOG to select function On/Off, and press the JOG.

6 Press the MENU/STORE button to register the settings.