Silent skip
Set the silent skip function.
•Silent skip
The silent skip function automatically pauses the recording if there is a period of no signal during recording. Recording automatically starts again when an input signal is received. This function cuts unnecessary sections (sections with no sound) from within one track, and saves only the necessary sections. The file size is smaller, search is easier during playback, and the tracks are easier to listen to.
When silent skip is set, “S.SKIP” lights in the display, and it flashes when the recording is paused while there is no input signal.
•Silent skip/Track increment
Silent skip is processed within one track. However, if this function is set, every time the input signal is received, a new track is automatically created for the recording.
Notes
•This function does not operate when [Background recording] is set to On in the preset menu.
•When silent skip is set to ON, the prerecord function operates for 2 seconds, irrespective of the prerecord setting time.
•When silent skip is set to On, and the REC PAUSE button is pressed while the recorder is paused due to there being no signal, the recorder switches to regular recording pause status. At this time, the S.SKIP icon flashes in the display.
<Default value >
Preset1 : Off / Time : 3 sec / Level :
Preset2 : Off / Time : 3 sec / Level :
Preset3 : Off / Time : 3 sec / Level :
1 While the recorder is stopped, press the MENU/STORE button.
2 Turn the JOG to select “Preset” and press the JOG.
3 Turn the JOG to select the preset number that you wish to set, and press the JOG.
4 Turn the JOG to select “SilentSkp” and press the JOG.
5 Turn the JOG, and select “On” to set silent skip, “T/ON” to set silent skip/track increment, or “Off” if you do not wish to set either. After making your selection, press the JOG.
On | Silent Skip |
|
|
T / ON | Silent Skip Track |
|
|
Off | Off |
|
|
6 If you activate this function, turn the JOG to select the no signal status judgment level
31