Marantz CD Recorder, CDR310 manual About Discs, Playable discs, Always keep the disc surface clean

Page 9

About Discs

Playable discs

CD-R

CD-RW

Finalized CD-R and CD-RW discs recorded in the CD-DA format, MP3 format or Video-CD format can be played with the unit.

Finalize is the process to make a CD-R/CD-RW playable for players (not recorders)

Some discs may not be able to be played depending on condition of the discs and recording software.

Single CDs (8cm) cannot be used.

ADDITIONAL INFORMATION

The glossy side shining like a rainbow is the front side of the disc, and the side on which the label is printed is the back. Unlike conventional turntables for playing analog discs, the unit reads the information recorded on the disc from underneath without contacting it using a beam of laser light. Therefore, the performance of a compact disc will not degrade like conventional analog records.

Handle discs carefully so as not to damage or scratch the front side.

To protect the disc, avoid placing it in the following locations:

In direct sunlight or near a source of heat like a heater.

In a place which is damp or dirty.

In a place which could be exposed to rain, such as near a window.

Always keep the disc surface clean.

When cleaning the disc surface, always be sure to use a special compact disc cleaner and wipe as shown below.

Do not use conventional record cleaner for analog records, as this will adversely affect the disc surface.

Store discs properly by placing them in their disc cases.

Do not attach a piece of paper or sticker on the label side of disc. When a disc has a piece of plastic tape or rental DVD/CD label with paste protruded from the edge or when a disc has a trace of such a sticky object, do not attempt to play the disc. If such a disc is played on the DVD player, impossibility of taking out the disc or other malfunction may result.

Do not use a disc with a special shape.

Do not attempt to play a disc with a special shape such as a heart-shaped disc or octagonal disc. Otherwise the equipment malfunction may result.

5

Image 9
Contents Model CDR310 User Guide Laser Safety Important Safety Instructions Français EnglishDeutsch NederlandsTable of Contents Introduction FeaturesPackage contents Quick Start Guide Setup the power supply P.XXAlways keep the disc surface clean About DiscsPlayable discs Top side Names and Functions9REC Indicator 4CANCEL button1MENU/STORE button 2F.REV 5 buttonRear side Front sideRight side Display Guide to battery lifespan Using batteriesPreparations Before Use AC adaptor connectionSafety cautions on handling batteries Installing an optional Ni-Cd or Ni-MH batteryCharging the optional Ni-Cd battery Battery type settings Power on/offDefault value Alkaline Basic OperationsThere is not enough battery power remaining to Battery remaining indicatorWhen DateForm M/D/Y Setting the clockTime form settings Date form settingsDefault value M/D/Y Default value 12HInput RecFormat CD Split Default Menu SettingsMENU/STORE Button Date/TimeInput P.xx Preset menuMenu operation Schematics Recording to the HDBasic operations for recording Formatting the HD Erasing recordingsDetailed Settings for HD Recording Input source settingsDefault value Preset1 MIC Preset2 MIC Preset3 MIC When the channel setting is Stereo Recording format settingsPage Recording level control settings Operations when manual control is set Microphone attenuator Default value Preset1 OffDefault value Preset1 Off Preset2 Off Preset3 Off Phantom power settingsPrerecord Default value Preset1 Off Preset2 4 sec Preset3 4 secBackground recording Silent skip Default valueManual track Default value Preset1 On Preset2 On Preset3 OnAuto track CD Burning Page CD Split Basic operations for playback Playing Back HD DataSearch Track accessAudible search Fast reverseYou can select the playback mode from the following 4 modes Playback mode settingsPlaying Back CDs CD PlaybackVarious CD playback operations Beep sound alarm setting Auto power off settingsDefault value Off / 15 min Default value OnWhen the HD is stopped Switching the display modeWhen CD is stopped When in HD recording or recording paused statusWhen in HD/CD playback or playback paused status Key lock settings Stop Monitor settingsMicrophone remote connection Various remote functionsInitialization of preset settings Margin displayCD-TEXT, ID3 tag Troubleshooting Error Messages Specifications How You Can Get Service Americas only Non-transferable warrantyWhat We Will Pay For Limitation of Implied WarrantiesHoldings Inc