BASIC OPERATION
USE MODE
The remote controller will normally be used in the USE mode.
It comes preset with codes commonly used to control 11 types of components manufactured by Marantz, Philips and RCA (for DSS), including DSS, DVD, TV, LD, VCR, AUX, TUNER, CD, TAPE,
1.Press once one of the Function buttons , to change to another component’s commands, such as LD button.
C D |
| DVD | |||
DSS | T V |
|
| VCR | AUX |
L D | TUNER | TAPE | AMP | ||
CLEAR | MEMO |
|
| GUIDE | MUTE |
AUTO | DOLBY | THX |
| DTS | HALL |
1 | 2 | 3 |
| 4 | 5 |
MATRIX | MOVIE | 2CH |
| OSD | SLEEP |
2.LD will be displayed on the LCD and the function codes will be set to operate the laser disc player, and if you double clicked the LD function button, the amplifier or receiver’s input will be changed as well.
3.Now you can operate the laser disc player.
When a button is pressed, the symbol indicates that a remote code is being
transmitted. is not displayed if a button for which no code has been set is pressed.
4.The Jog Dial m is used to select any one of up to 10 direct operations that can be performed for each of the 11 functions including LD, TV and AMP. Rotate the Jog Dial m to select one of these
commands. The number of the current page is indicated by - at LCD C. The signal is sent when the ENT button n
is pressed.
Page numbers cycle up or down, for
example | → | → | → | → etc. or |
→ → → → etc. depending on which way the Jog Dial m is rotated. The last page position for any given command function is retained in the memory even if the remote controller is switched to the command function for another component. (Last Memory)
ENGLISH
9