⁄4GUIDE button
Used to call up the
⁄5CLEAR button
Used to clear the contents of memory or programmed functions.
⁄6MEMO button
Used to program your CD player’s track memory, or to enter a VCR recording program, and can be used to provide the MEMO function included with other components in your system.
⁄7Ten-Key pad/Surround
Mode buttons
Used to enter numeric digits, useful for finding a specific track on a CD, or to tune a preset radio station, etc. When the function is set to AMP, it is possible to choose Surround Mode, etc.
⁄8Infrared Transmitter/
Receiver Window
Used to transmit remote control signals based on beams of infrared light to system components. To ensure that these signals are properly received, make sure that this window is pointing in the general direction of the infrared receiver on the amplifier or other components. This window should also be pointed toward the source remote controller when using Programmable Learning function.
⁄9LIGHTING button
When this button is pressed, the LCD display lights up, and it goes off 5 seconds later. While it is held down, the display remains lighted.
Note:
The programmable learning function does not work with buttons z, x, n, ⁄1and ⁄9.
ENGLISH
5