POWER
SOURCE
ON ON / OFF OFF
LEARNING REMOTE
CONTROL RC 1200 MACRO MODE
2.Erasing by Button(s)
T o c l e a r t h e c o d e s a n d n a m e s programmed in any of the buttons
•Press the button concerned twice while holding down the CLEAR button ⁄5.
ENGLISH
When the codes are cleared, the button returns to its factory presets or it is left empty.
Jog Dial codes can be cleared in the same way: turn the Jog Dial to call up the name of the command whose codes are to be erased, and press the ENT button n (either the left one or the right one) twice while holding down the CLEAR button ⁄5, and the c o d e s a n d c o m m a n d n a m e s memorized in the button will be cleared.
When the codes are cleared, the button returns to its factory presets or it is left empty.
•To erase codes programmed for the CLEAR button ⁄5, simply press the CLEAR button ⁄5continuously for 3 seconds.
As an example, let’s clear the PLAY command from the laser disc player command set.
1.While holding down the CLEAR button ⁄5:
w | CH | OK |
| VOL |
| C D | DVD | ||
| DSS | T V | VCR | AUX |
| L D | TUNER | TAPE | AMP |
q | CLEAR | MEMO | GUIDE MUTE | |
| AUTO | DOLBY THX | DTS | HALL |
1 2 3 4 5
2.Press the OK Cursor button ⁄0twice.
17