NAMES OF PARTS & FUNCTIONS
Names of Buttons & Functions
zMODE button
Used to change the operation mode of the remote controller. Pressing this button cycles the remote controller through USE → LEARN → NAME → CLONE TX → CLONE RX → USE , with the currently selected mode displayed on the LCD.
xMACRO button
Used to store a string of consecutive button operations in the memory and also to revise them.
Pressing it switches the remote controller in and out of the MACRO mode. Its status is displayed on the LCD.
cPower ON and OFF
buttons
Used to turn ON and OFF the power of the amplifier or receiver or turn ON and OFF the power of a source component which has its own ON and OFF buttons.
vSource ON/OFF button
Used to turn specific sources (such as DVD players, etc.) ON and OFF independently from the rest of the system.
bLCD
Used to display information about currently selected modes and functions.
nENT buttons
Used to execute a function selected with the Jog Dial m.
There are 2 ENT buttons, one on each side, so that the remote controller can be used just as easily with either hand.
The characters on the display can also be programmed.
mJog Dial
Used to select the operation content for each source. Ten types of direct operation are possible for each of the 11 functions including LD, TV, AMP, etc. After selecting the desired function, press either of the ENT buttons n to transmit the signal.
ENGLISH
3