Example

2.Press the Function button , for which you wish to program a series of operations. In this case, let’s use the example of the laser disc player.

Press the LD Function button ,.

The LCD A will display LD-M.

The characters displayed at LCD A are as follows. However, when a function name has been overwritten, "–M" appears for the first 2 or 3 characters.

LD-M, DVD-M, TV-M, DSS-M, VCR-M, AUX-M, TUN-M, CD-M, TP-M, AMP-M, CDR-M (or MD-M for remote controller set for MD).

•If a macro has already been set for the selected function button, the LCD A

will blink. Also, the number of steps in the macro is displayed on LCD C.

3.Press the buttons for the operations you wish to program as a macro in the sequence you want the macro to program them. The name of the button pressed appears on LCD A. The number of steps in the macro is displayed on LCD C and this number increases by 1 with each button pressed.

For example, press LD, PLAY.

	ENT		EN
w	CH	OK	VO

ENGLISH

	C D	DVD		CD-R/MD
	DSS	T V		VCR	AUX
q	L D	TUNER	TAPE		AMP
	CLEAR	MEMO		GUIDE	MUTE
	AUTO	DOLBY THX		DTS	HALL

Each function button can be programmed to perform up to 10 steps in sequence.