Rewriting Names

ENGLISH

•If you do not wish to rewrite the name, simply press the OK Cursor button ⁄0.

•If you wish to rewrite the name, input the

desired characters using the ten-key pad ⁄7. The part of the display which is to be overwritten can be moved using

the left (<) and right (>) Cursor buttons ⁄0. When you are finished rewriting, press the OK Cursor button ⁄0.

To simply erase already existing characters, press the 0 button to replace them with a blank space.

(Refer to next section on rewriting names)

6.Use the same procedure to program the codes for other 1-6 with the Jog Dial m.

7.When finished programming the codes for each of the buttons, use a ballpoint pen or other sharp point to press the MODE button z to return the remote controller to the USE mode. The LCD displays USE indicator, and the newly programmed codes now can be used.

This remote controller allows the names accessible by Jog Dial m to be rewritten with new ones of your choosing.

•Rewriting of names is performed for each individual function.

•Let’s use a laser disc player as an example to show how to change the ’s “SIDE-A” to “LD-A”.

1.Use a ballpoint pen or other sharp point to press the MODE button z to switch the remote controller to the NAME mode. The NAME indicator blinks.

2.Press the LD Function button ,.

The left-hand edge of the function name now blinks.

C D	DVD		CD-R/MD
DSS	T V		VCR	AUX
L D	TUNER	TAPE		AMP
CLEAR	MEMO		GUIDE	MUTE
AUTO	DOLBY THX		DTS	HALL

1 2 3 4 5

3.Use the Jog Dial m to select the page for which you wish to enter a new name. Press the down (v) Cursor button ⁄0, and move the blinking location to the Jog Dial.