Features, Location of Controls, Front Back

FEATURES

•181 Channel Tuner - The tuning system is capable of receiving all 68 VHF/UHF standard broadcast channels that are available in your area. When operating on a cable system, it can tune to the standard VHF channel frequencies plus up to 113 cable channel frequencies. The actual number of channels received depends upon channel reception in your area or your cable system.

•On-Screen 3 Language Display - This TV can display the on screen language in English, Spanish or French.

•Sleep Timer - Operable from the remote control, this TV can be programmed up to 120 minutes to turn off automatically.

•Memory Back Up - This system prevents loss of memorized channel selections in case a power interruption to the TV should occur.

•V-Chip - The V-Chip function can read the rating of a TV program or movie content if the program is encoded with this information. V-Chip will allow you to set a restriction level.

•Picture Control Adjustments - The On-Screen display allows precise remote control adjustment of BRIGHTNESS, COLOR, CONTRAST, SHARPNESS and TINT.

•Closed Captioned Decoder - Displays text captions or 1/2 of full screen text on the screen for hearing impaired viewers.

•Stereo/SAP Reception - This TV is designed to receive stereo and Second Audio Program (SAP) broadcasts where available.

LOCATION OF CONTROLS

FRONT

BACK

ANT.

(MONO)

VIDEO IN L – AUDIO IN – R

POWER		▼ CHANNEL ▲		▼ VOLUME ▲
		ENTER	RESET	SET / MENU +
1	2		3	4	5

1.POWER Button - Press to turn the TV on or off.

2.Remote Sensor - Signals from the Remote Control unit are received here.

3.CHANNEL ▼ / ▲ Buttons - Press to select a higher or lower numbered channel set into memory.

(ENTER Button) - Press to enter or select information for On-Screen operations.

(RESET Button) - Press, while in the On-Screen menu mode, to reset the On-Screen picture adjust- ments to their factory preset positions.

4.VOLUME ▼ / ▲ Buttons - Press to raise or lower the level of the sound.

(MENU Buttons) - Press both buttons to display the On-Screen menu functions.

(SET + / – Buttons) - Press to select the desired setting during On-Screen operations.

5.AUDIO (L / R) / VIDEO IN Jacks -Audio and video signal cables from an external source can be connected here.

6.VHF/UHF IN (ANT) Jack - Connect a VHF/UHF antenna or CATV cable to this jack.

7.AC Power Cord - Plug into an outlet having 120V, 60 Hz AC power only.

3M90701A-E

5/26/03, 9:28 AM