STEREO AND SEPARATE AUDIO PROGRAM (SAP)
The TV is equipped with a feature known as
LISTENING TO SAP (SEPARATE AUDIO PROGRAM)
When the TV is turned on or a channel selection is made, make certain that the letters “SAP” appear on the screen. This means that the "Separate Audio Program" broadcasting is available.
TO SELECT DESIRED SOUND
Press the AUDIO SELECT button to select the desired sound.
LISTENING TO STEREO SOUND
When the TV is turned on or a channel selection is made, make certain that the word “STEREO” appears on the screen. This means that "Stereo" broadcasting is available. You can enjoy stereo sound from the left and right speakers.
•When the "Mono" broadcasting is received, no indication is displayed.
•If the broadcast signal is not strong enough or clear stereo sound is not available, press the AUDIO SELECT button to change to mono sound. The noise should be eliminated. Press it again to return to the stereo sound.
MONO+SAP BROADCASTING
MAIN SOUND |
|
|
| SAP SOUND |
|
|
| MAIN + SAP SOUND | ||
(MONO) |
|
|
|
|
|
| (MONO) | |||
|
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
STEREO+SAP BROADCASTING
MAIN SOUND |
|
|
|
|
| SAP SOUND | |
(STEREO) |
|
|
|
|
| ||
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
MAIN SOUND |
|
|
|
|
| MAIN + SAP SOUND | |
(MONO) |
|
|
|
|
| (MONO) | |
SOUND ADJUSTMENTS
Sound controls are factory preset but you can adjust them individually as follows:
To display sound adjustments on the screen, press the MENU button. Press the SET + or – button to select the AUDIO option, then press the ENTER button.
BALANCE
Press the ENTER button until “BALANCE” appears on the screen, then press the SET + or – button to obtain an equal sound level from both speakers.
BASS
Press the ENTER button until “BASS” appears on the screen, then press the SET + or – button to adjust the bass sound.
TREBLE
Press the ENTER button until “TREBLE” appears on the screen, then press the SET + or – button to adjust the treble sound.
RESET
Pressing the RESET button while making sound adjustments will return all adjustments to the factory preset levels.
NOTE: The
ADJUSTING PICTURE
You can adjust the settings for color, sharpness, contrast, brightness and tint.
1 Press the MENU button.
2 Press the SET + or – button until the indicator next to "PICTURE" begins to flash, then press the ENTER button.
3 Press the ENTER button repeatedly to select the item you want to adjust.
4 Press the SET + or – button to adjust the setting.
| + | – |
BRIGHTNESS | increase brightness | decrease brightness |
CONTRAST | increase contrast | decrease contrast |
COLOR | brilliant color | pale color |
TINT | greenish color | reddish color |
SHARPNESS | makes picture clearer | makes picture softer |
TO RETURN TO INITIAL SETTING
Press the RESET button while the picture adjusting mode appears
BRIGHTNESS 
CONTRAST 
COLOR 
TINT 
SHARPNESS
10
10 | 5/3/02, 6:54 PM |