Meridian America 586 There are clicks when starting to play a disc, There is no video output

Page 66

Setting up the DVD player

There are clicks when starting to play a disc

❍If you are using a source other than DVD to control the DVD player, check that it is configured as -Cin Config. This ensures that the Meridian preamplifier or control unit mutes the sound when a disc is not playing.

❍If you are using a non-Meridian preamplifier the clicks are unavoidable.

For more information see To configure another source to control the DVD player, page 50.

There is no video output

Only one of the S-Video or COMPONENT video outputs is active at any time, depending on the option selected in the VIDEO OUT SEL. menu; see To select the video output format, page 40.

To change the menu option connect the COMPOSITE video output, which is active irrespective of this setting, or use the Video toggle configuration option; see To change the video output format, page 49.

The on-screen display shows PLEASE CHECK DISC when attempting to play a disc

❍Check that the disc is positioned correctly in the drawer; see To insert a disc, page 11.

❍If it is a single-sided disc check that the label is uppermost.

❍Check that it is not a recordable CD.

❍Try playing another disc. If this disc works, check the problem disc for signs of dirt or damage.

62

Image 66

Contents Meridian 586 DVD Player Preface Contents Setting default options Configuring the DVD Player47Setting up the DVD Player53 Introduction Professional features Meridian 500 SeriesSeries communications Sample configurations Stereo music/video system Meridian Analogue TheatreMeridian Digital Theatre Multimedia system Specification and accessories SpecificationAvailable accessories Using the DVD player DVD remote Zoom Front panel 586To switch on from standby Playing a discTo insert a disc To restart the current chapter or track To switch to standbyTo play the disc To move to the next chapter or trackLocating a specific title, chapter, or track To play starting from a particular chapter or trackTo locate a title or chapter/track by number To locate a specific location within a titleTo step forward frame by frame To stop play Stopping, pausing, and resuming playTo continue after pausing To resume after stoppingDisc information To display disc information on screenTo change the front panel display To display information about DVD video disc features To turn off the on-screen displayUsing the DVD player Advanced features To select a title using the Title Menu Selecting options from a menuTo select an option from the disc menu Fast and slow-motion play To play DVD video discs faster than normalTo play DVD video discs in slow motion To play audio CDs faster than normalTo resume normal speed To repeat a specific section of a disc Playing repeatedlyTo repeat a title, chapter, or track To resume normal playbackProgramming a selection To program a selectionTo change the selection you have programmed To play the selection you have programmedSelecting a playback audio setting To select the audio settingDisplaying subtitles To display subtitlesTo select a subtitle language To change the camera angle To turn off the angle number indicatorSelecting the camera angle and zooming the picture To zoom the pictureSetting the parental lock To set the parental lockAdvanced features To change the parental lock setting To cancel the parental lock functionTo change the four-digit security code Language codes SPASetting default options Setting default options To display the SET UP MenuTo exit from the set up menus To select a set up menuTo change a setting To return to the previous menuSelecting the audio settings To select the default soundtrack languageTo select the audio output format To select dynamic range controlTo select vocal karaoke Selecting the function settings To select the black levelTo select title stop To select the video output formatTo select the on-screen display Selecting the display settings To select the language for screen displaysTo set the default picture format To set the default subtitle language To display the angle iconTo set the default disc menu language Setting default optionsSetting default options Configuring the DVD player Choosing standard settings To restore the standard settingsConfiguring the 586 DVD Player To configure specific optionsTo change the video output format To change the fan setting To configure another source to control the DVD playerTo set other configuration options Option Initial valueConfiguring the DVD player Setting up the DVD player Unpacking To position the DVD playerRadio interference Back panel Video connectionsAudio connections Communications connectionsConnecting using S-Video Connecting videoConnecting using component video Connecting using composite videoConnecting audio To connect to a Meridian 565 Digital Surround ProcessorTo connect to the Meridian 541 Surround Controller To connect to Meridian DSP loudspeakers Connecting to other Meridian equipment To connect to other Meridian 500 Series equipmentTroubleshooting No lights are displayed when switching onThere is no sound when playing a disc There are clicks when starting to play a disc There is no video outputHand symbol is displayed on the on- screen display On-screen display shows Disc Playback UnauthorizedTo clean the case, display panel, and keypad MaintenanceCleaning To clean the audio and video connectionsService and guarantee ServiceGuarantee Setting up the DVD player Index Analogue OUTDisc Playback Unauthorized SET UP Menu Standard settings