Meridian America 586 manual Troubleshooting, No lights are displayed when switching on

Page 65

Troubleshooting

This section describes problems you may encounter when using the DVD player, and includes suggested solutions.

If these suggestions fail to cure the problem, please contact your Meridian dealer for further assistance.

❍Try playing another disc. If this disc works, check the problem disc for signs of dirt or damage.

❍If you are using the DVD player with a preamplifier or active loudspeakers check that the AUDIO OUT SEL. menu option is set to PCM; see To select the audio output format, page 37.

No lights are displayed when switching on

❍Check that your AC power supply is connected correctly.

❍Check that the ON/OFF switch on the back panel is in the ON position.

There is no sound when playing a disc

❍Check that your preamplifier is switched on, and the volume is at an appropriate level.

❍Check that the DVD player is connected correctly to the other components of your system; see Setting up the DVD player, page 53.

❍Check that the correct source has been selected on your preamplifier.

❍Check that the display does not show Pause.

There is interference on the radio and/ or television when the DVD player is switched on

Before following the steps below, ensure all units are switched off first.

If this equipment does cause or suffer from interference to/from radio or television reception then the following measures should be tried:

❍Reorient the receiving aerial (or antenna) or route the antenna cable of the receiver as far as possible from the 586 DVD Player and its cabling.

❍Ensure that the receiver uses well-screened antenna cable.

❍Relocate the receiver with respect to the DVD player.

❍Connect the receiver and this product to different AC outlets.

Setting up the DVD player

61

Image 65

Contents Meridian 586 DVD Player Preface Contents Setting up the DVD Player53 Setting default optionsConfiguring the DVD Player47 Introduction Series communications Professional featuresMeridian 500 Series Stereo music/video system Meridian Analogue Theatre Sample configurationsMeridian Digital Theatre Multimedia system Available accessories Specification and accessoriesSpecification Using the DVD player DVD remote Zoom 586 Front panelTo insert a disc To switch on from standbyPlaying a disc To play the disc To switch to standbyTo restart the current chapter or track To move to the next chapter or trackTo play starting from a particular chapter or track Locating a specific title, chapter, or trackTo locate a specific location within a title To locate a title or chapter/track by numberTo continue after pausing Stopping, pausing, and resuming playTo step forward frame by frame To stop play To resume after stoppingTo change the front panel display Disc informationTo display disc information on screen To turn off the on-screen display To display information about DVD video disc featuresUsing the DVD player Advanced features To select an option from the disc menu To select a title using the Title MenuSelecting options from a menu To play DVD video discs faster than normal Fast and slow-motion playTo resume normal speed To play DVD video discs in slow motionTo play audio CDs faster than normal To repeat a title, chapter, or track Playing repeatedlyTo repeat a specific section of a disc To resume normal playbackTo program a selection Programming a selectionTo play the selection you have programmed To change the selection you have programmedTo select the audio setting Selecting a playback audio settingTo select a subtitle language Displaying subtitlesTo display subtitles Selecting the camera angle and zooming the picture To turn off the angle number indicatorTo change the camera angle To zoom the pictureTo set the parental lock Setting the parental lockAdvanced features To change the four-digit security code To change the parental lock settingTo cancel the parental lock function SPA Language codesSetting default options To display the SET UP Menu Setting default optionsTo change a setting To select a set up menuTo exit from the set up menus To return to the previous menuTo select the default soundtrack language Selecting the audio settingsTo select dynamic range control To select the audio output formatTo select vocal karaoke To select the black level Selecting the function settingsTo select the video output format To select title stopTo select the on-screen display To select the language for screen displays Selecting the display settingsTo set the default picture format To display the angle icon To set the default subtitle languageSetting default options To set the default disc menu languageSetting default options Configuring the DVD player To restore the standard settings Choosing standard settingsTo change the video output format Configuring the 586 DVD PlayerTo configure specific options To configure another source to control the DVD player To change the fan settingOption Initial value To set other configuration optionsConfiguring the DVD player Setting up the DVD player Radio interference UnpackingTo position the DVD player Video connections Back panelCommunications connections Audio connectionsConnecting using component video Connecting videoConnecting using S-Video Connecting using composite videoTo connect to the Meridian 541 Surround Controller Connecting audioTo connect to a Meridian 565 Digital Surround Processor To connect to Meridian DSP loudspeakers To connect to other Meridian 500 Series equipment Connecting to other Meridian equipmentThere is no sound when playing a disc TroubleshootingNo lights are displayed when switching on There is no video output There are clicks when starting to play a discOn-screen display shows Disc Playback Unauthorized Hand symbol is displayed on the on- screen displayCleaning MaintenanceTo clean the case, display panel, and keypad To clean the audio and video connectionsGuarantee Service and guaranteeService Setting up the DVD player Analogue OUT IndexDisc Playback Unauthorized SET UP Menu Standard settings