KTI Networks KC-300D manual Installation, Unpacking, Mounting the Device

Page 13

2. Installation

2.1 Unpacking

Check that the following components have been included:

•Installation guide (or contained in the product CD)

•10/100 Media Converter

•One AC power adapter

If any item is found missing or damaged, please contact your local reseller for replacement.

2.2 Mounting the Device

Desktop Mounting

The media converter can be mounted on a desktop or shelf. Make sure that there is proper heat dissipation from and adequate ventilation around the device. Do not place heavy objects on the device.

Wall Mounting

The media converter also can be mounted on a wall. On bottom of the device, wall mounting hole is provided for wall mounting.

Installation into Center Chassis KC-1300

The media converter also can be installed in KC-1300 center chassis. The center chassis provides the power supply to the converter. Up to 16 units can be installed in one chassis. Unscrew and remove the cover of the center connector before inserting the converter into the chassis. Refer to the operation manual of center chassis KC-1300 for more information.

-13-

Page 12 Page 14
Image 13
Page 12 Page 14
Contents 10/100BASE-TX to 100BASE-FX Media Converters International United StatesEthernet is a registered trademark of Xerox Corp Table of Contents Introduction Key FeaturesTwisted-Pair Interface TPPort SpecificationsOptionalSettingsUserinaccessibleJP1-JP3onboard User Accessible Settings SWFiber Optic Interface FX Port DC Power Input LEDIndicatorsCenter Connector Mechanical Basic InformationEnvironmental CertificateDuplex Fiber Series Optical SpecificationsSingle Fiber Bi-Di WDM Series Special Functions Far End Fault FunctionAutoMDI/MDI-XFunction Auto-negotiation FunctionLink Fault Pass Through Function Unpacking InstallationMounting the Device AC Power Adapter Specifications Applying PowerMaking TP Port Connection Configuration SetupNetwork Cables Making FX Port Connection Duplex Fiber Series Model Connector WavelengthDuplex Fiber Cwdm Series Model Link Fault Pass Through Function is disabled LED IndicatorsLink Fault Pass Through Function is enabled User Inaccessible Jumpers Optional Configuration SettingsJP1 Setting TP port to/from FX port Forwardmethod Forwarding Mode Setting JP1FX Duplex Setting JP3 2 802.3x Function Setting JP2JP1-JP3 Factory Default Settings
Top Page Image Contents