KTI Networks KC-300D manual Optional Configuration Settings, User Inaccessible Jumpers

Page 19

3. Optional Configuration Settings

The media converter provides additional configuration settings which are user-inaccessible. The settings are built on the board inside the prod- uct case. The settings are provided for technical installers to adapt the converter to fit some specific application needs.

3.1 User Inaccessible Jumpers

The setting jumpers are not accessible by users generally. For accessing these jumpers, the upper case must be removed from the product. Re- moving the case must be performed by an authorized and experienced technical person. The setting jumper block is located on the position shown below:

The setting functions are as follows:

JP1	Forwarding mode setting	Open	- Store-and-forward mode
		Short	- Smart-forward mode
JP2	802.3x function setting	Open	- Enable
		Short	- Disable
JP3	FX port duplex setting	Open	- Full duplex mode
		Short	- Half duplex mode

-19-

Image 19

Contents 10/100BASE-TX to 100BASE-FX Media Converters International United StatesEthernet is a registered trademark of Xerox Corp Table of Contents Introduction Key FeaturesTwisted-Pair Interface TPPort SpecificationsOptionalSettingsUserinaccessibleJP1-JP3onboard User Accessible Settings SWFiber Optic Interface FX Port DC Power Input LEDIndicatorsCenter Connector Certificate Basic InformationMechanical EnvironmentalDuplex Fiber Series Optical SpecificationsSingle Fiber Bi-Di WDM Series Auto-negotiation Function Far End Fault FunctionSpecial Functions AutoMDI/MDI-XFunctionLink Fault Pass Through Function Unpacking InstallationMounting the Device AC Power Adapter Specifications Applying PowerMaking TP Port Connection Configuration SetupNetwork Cables Making FX Port Connection Duplex Fiber Series Model Connector WavelengthDuplex Fiber Cwdm Series Model Link Fault Pass Through Function is disabled LED IndicatorsLink Fault Pass Through Function is enabled User Inaccessible Jumpers Optional Configuration SettingsJP1 Setting TP port to/from FX port Forwardmethod Forwarding Mode Setting JP1FX Duplex Setting JP3 2 802.3x Function Setting JP2JP1-JP3 Factory Default Settings