KTI Networks KC-300D manual United States, International

Page 2

(C)2003 KTI Networks Inc. All rights reserved. No part of this documen- tation may be reproduced in any form or by any means or used to make any directive work (such as translation or transformation) without per- mission from KTI Networks Inc.

KTI Networks Inc. reserves the right to revise this documentation and to make changes in content from time to time without obligation on the part of KTI Networks Inc. to provide notification of such revision or change.

For more information, contact:

United States	KTI Networks Inc.
	P.O. BOX 631008
	Houston, Texas 77263-1008
	Phone:	713-2663891
	Fax:	713-2663893
	E-mail:	kti@ktinet.com
	URL:	http://www.ktinet.com/
International	Fax:	886-2-26983873
	E-mail:	kti@ktinet.com.tw
	URL:	http://www.ktinet.com.tw/

-2-

Image 2

Contents 10/100BASE-TX to 100BASE-FX Media Converters United States InternationalEthernet is a registered trademark of Xerox Corp Table of Contents Key Features IntroductionSpecifications Twisted-Pair Interface TPPortFiber Optic Interface FX Port User Accessible Settings SWOptionalSettingsUserinaccessibleJP1-JP3onboard Center Connector LEDIndicatorsDC Power Input Environmental Basic InformationMechanical CertificateSingle Fiber Bi-Di WDM Series Optical SpecificationsDuplex Fiber Series AutoMDI/MDI-XFunction Far End Fault FunctionSpecial Functions Auto-negotiation FunctionLink Fault Pass Through Function Mounting the Device InstallationUnpacking Applying Power AC Power Adapter SpecificationsNetwork Cables Configuration SetupMaking TP Port Connection Duplex Fiber Cwdm Series Duplex Fiber Series Model Connector WavelengthMaking FX Port Connection Model Link Fault Pass Through Function is enabled LED IndicatorsLink Fault Pass Through Function is disabled Optional Configuration Settings User Inaccessible JumpersForwarding Mode Setting JP1 JP1 Setting TP port to/from FX port ForwardmethodJP1-JP3 Factory Default Settings 2 802.3x Function Setting JP2FX Duplex Setting JP3