KTI Networks KC-300D manual Model

Page 17

Single Fiber Bi-Di WDM Series

Model	Connector	Wavelength	Fiber	Ref. Distance
300D-W3515	Bi-Di SC	Tx 1310nm	Single SMF	15 - 20km
		Rx 1550nm
300D-W5315	Bi-Di SC	Tx 1550nm	Single SMF	15 - 20km
		Rx 1310nm
300D-W3540	Bi-Di SC	Tx 1310nm	Single SMF	40km
		Rx 1550nm
300D-W5340	Bi-Di SC	Tx 1550nm	Single SMF	40km
		Rx 1310nm

Since the WDM single fiber media converters use different wavelengths for transmission and receiving respectively, the link partner device lo- cated on the remote end of the single fiber should match the wavelength used on the single fiber converter.

-17-

Image 17

Contents 10/100BASE-TX to 100BASE-FX Media Converters International United StatesEthernet is a registered trademark of Xerox Corp Table of Contents Introduction Key FeaturesTwisted-Pair Interface TPPort SpecificationsFiber Optic Interface FX Port User Accessible Settings SWOptionalSettingsUserinaccessibleJP1-JP3onboard Center Connector LEDIndicatorsDC Power Input Mechanical Basic InformationEnvironmental CertificateSingle Fiber Bi-Di WDM Series Optical SpecificationsDuplex Fiber Series Special Functions Far End Fault FunctionAutoMDI/MDI-XFunction Auto-negotiation FunctionLink Fault Pass Through Function Mounting the Device InstallationUnpacking AC Power Adapter Specifications Applying PowerNetwork Cables Configuration SetupMaking TP Port Connection Duplex Fiber Cwdm Series Duplex Fiber Series Model Connector WavelengthMaking FX Port Connection Model Link Fault Pass Through Function is enabled LED IndicatorsLink Fault Pass Through Function is disabled User Inaccessible Jumpers Optional Configuration SettingsJP1 Setting TP port to/from FX port Forwardmethod Forwarding Mode Setting JP1JP1-JP3 Factory Default Settings 2 802.3x Function Setting JP2FX Duplex Setting JP3