VDH910 VIDEOCASSETTE PLAYER/RECORDER
Using Manual Tracking
DESCRIPTION OF
Using the Remote Control, you can adjust the picture tracking manually.
• | Automatic tracking is initiated when you first insert a |
| videocassette in the CASSETTE Compartment. |
• | Manual tracking may be used when auto tracking does not |
| fully correct picture tracking noise. Press CH/TRK UP |
| button to increase or CH/TRK DN button to decrease |
To View
Main Menu
** MAIN MENU **
RECORD SPEED | (SP) |
AUTO REPEAT | (OFF) |
AUDIO OUTPUT | (STEREO) |
CHANNEL SETUP |
|
VCR OUTPUT CH | (3CH) |
|
|
[SHIFT/ENTER] | [MENU] |
manual tracking. |
NOTE: If you reach the limit on either TRACKING + or – and notice no further improvement, the tape may be severely worn or the unit’s heads may need cleaning.
Press
UP or DN
to select the
desired channel
Figure 5. SHIFT functions on the VDH910’s Remote Control.
Figure 6. Main Menu for On-Screen Programming.
1.Press MENU on your remote control. The Main Menu will appear on the screen.
2.Select the item you want to adjust using the SHIFT and the ENTER buttons on your remote. Press MENU to exit and store your selection.
If the main menu doesn’t appear, make sure the video source is tuned to VDH910 output. If the VCR is in the TV tuner mode, press the TV/VCR button to view the menu.
10