VDH910 VIDEOCASSETTE PLAYER/RECORDER
RECORDING WITH THE VDH910
Recording from the TV tuner
•Insert a videocassette (with the record protect safety tab intact) into the CASSETTE compartment, as shown in Figure 13 on page 14.
•Check for the proper tape speed which is set in the Main Menu. Confirm that the VCR indicator is not illuminated on the front panel. If not, press the TV/VCR button on the remote control.
•Select a channel to record from the tuner by pressing the CH/TRK UP/DN buttons on the remote control.
•Press REC on the remote control or the front panel of the VDH910. The REC indicator should illuminate on the front panel.
NOTE: If you want to edit out unwanted material during record- ing, press the STILL button to pause recording. To resume record- ing, press the STILL button again.
• To stop recording, press the STOP button.
Record Protect Tab
Before recording on any video cassette, make sure the record protect safety tab is present. To prevent accidental recording
over a cassette tape, remove the record protection tab on the cassette. To record on a tape with its tab removed, cover the hole with adhesive tape.
Recording from Line1 or Line 2 Inputs
•Insert a videocassette (with the record protect safety tab intact) into the CASSETTE compartment, as shown in Figure 13 on page 14.
•Check for the proper tape speed which is set in the Main Menu. Confirm that the VCR indicator is illuminated on the front panel. If not, press the TV/VCR button on the remote control.
•Select the proper input line to record by pressing the CH UP/DN buttons on the remote control to change between LINE1 or LINE2.
•Press REC on the remote control or the front panel of the VDH910. The REC indicator should illuminate on the front panel.
NOTE: If you want to edit out unwanted material during record- ing, press the STILL button to pause recording. To resume record- ing, press the STILL button again.
• To stop recording, press the STOP button.
16