Clarion VDH910 Videocassette Another tape Does not insert, Into unit, Is on, Unit is in Auto

TROUBLESHOOTING

OWNER’S MANUAL/INSTALLATION GUIDE

Symptom	Cause
Unit does not	No power.
work.

Videocassette	Another tape
does not insert	is already in unit.
into unit.
	Dew/Heat Sensor
	is on.
Pressing POWER	Unit is in Auto
will not turn unit	Play and buttons
off.	are inoperable
	(see page 11).
Tape will not	Tape is fully
rewind or	rewound or at
fast forward.	beginning.

Solution

Verify power wiring to unit (see page 18).

Check the Remote for a good battery.

Eject first video cas- sette and insert a second tape.

Leave power on to unit. (see page 4).

Go to Auto Repeat in the On-Screen function and turn that function off.

Eject videocassette and check tape position.

Symptom	Cause	Solution
Picture is noisy	Videocassette	Eject videocassette
	is worn.	and play another.
	Tracking is not	Adjust tracking
	set optimally.	(see page 10).
	Video heads	Clean unit – see
	are dirty.	your Clarion dealer.
Videocassette	Another tape	Eject first video cas-
does not insert	is already in unit.	sette and insert a
into unit.		second tape.
	Dew/Heat Sensor	Leave power on to
	is activated.	unit. (see page 4).
Hi-Fi indicated	Videocassette	Play a videocassette
but sound is	recorded by stereo	that has a Hi-Fi
mono.	recorder in mono.	stereo soundtrack.
Videocassette	Unit is set to mono	Use Remote buttons
sounds mono.	in Audio Output	to change audio
	mode.	modes (see page 11).

19