Clarion VDH910 owner manual Format

Page 22

VDH910 VIDEOCASSETTE PLAYER/RECORDER

SPECIFICATIONS

 

General Specifications

 

Power Requirement:

12 V DC

Power Consumption:

12 watts, Power On

Weight:

5.3 lb (2.4 kg)

Dimensions (w x h x d):

10.4 x 3.7 x 10.2 in.

 

(265 x 92.5 x 265 mm)

Tape Deck Specifications

 

Format:

VHS 1/2 inch (12.7 mm) Standard

Scanning System:

Standard NTSC

Recording System:

Rotary Double azimuth four-head

 

helical scanning system

Video heads:

DA-4 rotary heads

Audio heads:

Linear; 1 stationary

 

Hi-Fi; 2 rotary

Control head:

1 stationary

Erase head:

1 full track, 1 audio track

Antenna input/output terminals:

UHF/VHF: 75 ohms F-Connector

Recording/playback System:

Recording: VHS format (SP, SLP)

 

Playback: VHS format (SP, LP, SLP)

Record/Play Time:

6 hours with T-120 on SLP speed

FF/REW Time (T-120):

Approx. 2 minutes and 20 seconds

Supplied Accessories:

IR Remote Control, (1) 5 Meter A/V Cable,

 

4-pin Power Cable, (8) 3S-M4 Self-Tapping

 

Screws, (16) 1S-M5 Self-Tapping Screws,

 

(2) Installation Brackets, and Remote IR

 

Sensor.

Channel List

On Air

12 VHF (Channels 2-13)

 

56 UHF (Channels 14-69)

FCC STATEMENT

 

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 16 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particu- lar installation.

If this equipment does cause harmful interference to radio or television reception, which can be verified by turning the unit off and on, the user is encouraged to consult the dealer or an experienced radio/television techni- cian for help.

20

Image 22
Contents VDH910 Page About Installation Wear and tape cleaning requirements Use a dry cloth when dusting your VCR Videocassette Use Control Front AV Inputs using the Remote controlStereo in L/R LINE-1 RCA Jacks DC in 12V 4-Pin Molex4 5 7 9 q w e r t Play Button Press button to play the videocassette FF Button VDH910’s Remote Control Battery Installation for the VDH910’s Remote Control Videocassette in the Cassette Compartment Button to increase or CH/TRK DN button to decreaseRecord Speed SP or SLP Antenna/Cable display for On-Screen programming Channel Add/Delete for On-Screen programming Supplied IR Sensor for the VDH910 To cancel FF or REW, press Play or the Stop button REW, PLAY, and FF on the VDH910 Remote ControlRecording from the TV tuner VDH910 can be mounted horizontally or vertically, as Shown in Figures 15Wiring diagram for VDH910 Videocassette Another tape Does not insert Video heads Clean unit see Are dirtySounds mono Audio Output To change audio Mode Into unitFormat Page Clarion Corporation of America