OWNER’S MANUAL/INSTALLATION GUIDE
** CHANNEL SETUP **
ANT/CABLE......... (ANTENNA)
AUTO CHANNEL MEMORY
CHANNEL ADD/DELETE
|
|
|
|
|
|
|
|
|
|
|
| [SHIFT/ENTER] | [MENU] |
|
|
|
|
|
|
|
|
| |
|
|
|
| ** CHANNEL ADD/DELETE ** |
|
| |
|
|
|
| SELECT CHANNEL: [ 02] |
|
| |
|
|
|
| SELECT CHANNEL AND | Press | ||
|
|
|
|
|
| UP or DN | |
|
|
|
| PRESS [ENTER] TO ADD | to select the | ||
|
|
|
| PRESS [SHIFT] TO DELETE | desired channel | ||
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
|
| [SHIFT/ENTER] | [MENU] |
|
|
To Store
and EXIT
NOTE: Press the MENU button to interrupt the Auto Channel Memory function.
Channel Add/Delete
TV channels can be added or deleted from the tuner’s memo- ry using the Channel Add/Delete function.
•Select the Channel Add/Delete function from the Channel Setup Menu then press the ENTER button.
•Use the CH/TRK UP or DN buttons to select the desired channel. Press the ENTER button to add the channel, or press the SHIFT button to delete the channel.
Figure 10. Channel Add/Delete for On-Screen programming.
** MAIN MENU ** |
|
|
| ||
RECORD SPEED | (SP) |
|
|
| |
AUTO REPEAT | (OFF) |
|
|
| |
AUDIO OUTPUT | (STEREO) |
|
|
| |
CHANNEL SETUP |
|
|
|
|
|
VCR OUTPUT CH | (3CH) |
|
|
| |
VCR OUTPUT CH | (4CH) | ||||
[SHIFT/ENTER] | [MENU] |
|
|
|
|
To Store
and EXIT
Figure 11. VCR Output Channel for On-Screen Programming.
NOTE: The Auto Channel Memory function must be preformed before the Channel Add/Delete will function.
VCR Output Channel
The VDH910 is equipped with 75 ohm
•Select the VCR Output Channel function from the Main Menu.
•Press the ENTER button to toggle between CH3 or CH4.
13