Clarion VDH910 owner manual Use a dry cloth when dusting your VCR

Page 5

OWNER’S MANUAL/INSTALLATION GUIDE

CARE AND MAINTENANCE

VCR Care

Use a dry cloth when dusting your VCR.

Take care of your remote control. Keep the remote with your cassettes, where it is unlikely to be lost or damaged.

Keep liquids away from your VCR, including beverages and cleaning liquids. Spilling any liquid on the VCR can damage the electronics, resulting in an electrical shock or fire.

If the unit or remote control should become wet, turn off all power and let your authorized Clarion Dealer clean or service the equipment.

DO NOT ATTEMPT TO OPEN OR SERVICE THE UNIT OR REMOTE CONTROL. THE INTERNAL PARTS ARE NOT USER-SERVICEABLE. DOING SO WILL VOID THE WARRANTY.

Do not use liquid or aerosol cleaners that can accidentally get into the VCR causing damage or creating a fire haz- ard.

Do not allow coins, cleaning cloths, papers and other objects to be pushed into the cassette slot. These objects could connect with a voltage point inside the VCR and cause an electrical shock, or may short out parts causing unit failure or fire.

Head Cleaning

Over time the picture may become blurred, interrupted, or noisy. If dirt has accumulated on the video heads the unit may require cleaning. You can verify this symptom by play- ing several different videocassettes. If the problem is the same, then the heads need to be cleaned. Please consult your nearest Clarion Dealer for recommendations on cleaning products and service.

Operation Precautions

Do not subject the unit to direct sunlight or an extremely hot environment (e.g., closed windows on a hot summer day, direct path of heater vent, etc.).

Avoid using the unit under the following conditions:

After extended parking on an extremely hot or cold day.

Near strong magnetic fields.

3

Image 5
Contents VDH910 Page About Installation Wear and tape cleaning requirements Use a dry cloth when dusting your VCR Videocassette Use Stereo in L/R LINE-1 RCA Jacks Front AV Inputs using the Remote controlControl DC in 12V 4-Pin Molex4 5 7 9 q w e r t Play Button Press button to play the videocassette FF Button VDH910’s Remote Control Battery Installation for the VDH910’s Remote Control Button to increase or CH/TRK DN button to decrease Videocassette in the Cassette CompartmentRecord Speed SP or SLP Antenna/Cable display for On-Screen programming Channel Add/Delete for On-Screen programming Supplied IR Sensor for the VDH910 REW, PLAY, and FF on the VDH910 Remote Control To cancel FF or REW, press Play or the Stop buttonRecording from the TV tuner Shown in Figures 15 VDH910 can be mounted horizontally or vertically, asWiring diagram for VDH910 Sounds mono Audio Output To change audio Mode Video heads Clean unit see Are dirtyVideocassette Another tape Does not insert Into unitFormat Page Clarion Corporation of America