Sony KV-36FS320, KV-32FS320 Circuit Adjustments, Electrical Adjustments by Remote Commander

Signal ntsc Type

KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120

SECTION 4: CIRCUIT ADJUSTMENTS

ELECTRICAL ADJUSTMENTS BY REMOTE COMMANDER

Use the Remote Commander (RM-Y195, RM-Y196) to perform the circuit adjustments in this section.

Test Equipment Required: 1. Pattern generator 2. Frequency counter 3. Digital multimeter 4. Audio oscillator

4-1. SETTING THE SERVICE ADJUSTMENT MODE

1.Standby mode (Power off).

2.Press the following buttons on the remote commander within a second of each other:

Display Channel 5 Sound Volumne + Power

SERVICE ADJUSTMENT MODE ON

1. The CRT displays the item being adjusted.

			Signal	Display	Item
					Data
	Category		Type	Item #	41
Display		DEF	NTSC	1 NVM OK
		H SIZE
Item
		M65582AMF-101FPZ0

2.Press 1 or 4 on the Remote Commander to select the item.

3.Press 3 or 6 on the Remote Commander to change the data.

4.Press MUTING then ENTER to write into memory.

SERVICE ADJUSTMENT MODE MEMORY

Display Item

Mode Category Item Data

	service		defl hsiz 16
Signal		ntsc	write
Type
	vchp		00000000 00000000

1. Press 8 then ENTER on the Remote Commander to initialize.

Display Item

Mode Category Item Data

service defl hsiz 16

write

Carry out Step 1 when adjusting vchp 00000000 00000000 IDs 0-7 and when replacing and

adjusting IC002

2.Press MUTING then ENTER to write into memory.

3.Turn set off then on to exit Service Adjustment Mode.

4-2. MEMORY WRITE CONFIRMATION METHOD

1.After adjustment, pull out the plug from the AC outlet, then replace the plug in the AC outlet again.

2.Turn the power switch ON and set to Service Mode.

3.Call the adjusted items again to confirm they were adjusted.

4-3. REMOTE ADJUSTMENT BUTTONS AND INDICATORS

		MUTING		POWER
				(Service Mode)
		(Enter into
	memory)
				DISPLAY
				(Service Mode)
			3
				Item
				(Data up)
1			6
Disp. (Item up)				Item
2				(Data down)
			5
(Device Item Up)
				(Device item
4				down)
	Disp. (Item down)
				ENTER
				(Enter into
				memory)
8
		(Initialize)	0
			(Remove from
			memory)
	VOLUME (+)
	(Service Mode)

RM-Y195

KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 28