Recording
Other Recording Settings
Function Menu’s SET UP section = [Recording]: This command also allows the following settings:
Video Encode Rate: | 32 levels |
Video Filter (NR): | 16 levels |
Audio Encode: | Dolby Digital / LPCM(Note1) |
Audio Level: | |
Aspect: | 4:3 / 16:9 |
Setup Level: | 0 IRE / 7.5 IRE(Note2) |
Auto Chapter: | Manual / Automatic |
| (at 3/5/10/15/30/60 |
| minutes intervals) |
REC Button: | REC Start / |
| Standby = REC |
Video Encode Rate Settings
The SET UP section = [Recording] = [Video/ Audio] = [Video Encode Rate] command allows you to set the encoding rate for recording. This setting affects the recording time and the transfer rate (image quality). See pages 78 and 79 for information on the relationship between encoding rate and recording time/transfer rate.
The encode rate can be set either as a step between step 1 to 32 or as a recording time value. The recording time value is converted to the step that is closest to the set time.
SET UP section = [Recording] = [Video/Audio]
= [Video Encode Rate] Step change
SET UP section = [Recording] = [Video/Audio]
Note 1:
“LPCM” cannot be selected when “DV” is set as the input.
Note 2:
Cannot be selected when “PAL” is selected as the
TV system.
SET UP section = [Recording] = [Video/Audio]
= [Video Encode Rate] Time change
36