Title Editing / Chapter Editing
While playing back the selected clip, use the SELECT button on the displayed control bar to designate the point at which you wish to divide the clip. Clip division will begin when the SAVE button is pressed, and when completed, the display will return to the Function Menu. If the CANCEL button is pressed instead, the clip division will be canceled and the display will return to the Function Menu. When beginning the division, you may select whether to overwrite the divided clip, or save it as a new clip. When dividing a clip, the hard disk drive must have available space exceeding the size of the clip before division. When a clip is divided, a
Clip Divide Point | Play Time |
Play Title / Chapter
Total Title Time
OSD during Clip divide
Clip divide
Note 1:
The division point can be set only at the head of a group of pictures (GOP) (NTSC=15, PAL=12 frame units).
Note 2:
Once divided, a clip cannot be rejoined.
Title Order Edit
In the
Using the Function Menu’s EDIT section = [Title]
=[Title Selection] command, before final recording on the DVD disc, the clips can be allocated to a title in an order differing from that in which they were recorded.
EDIT section = [Title] = [Title Selection]
DVD Disc Emulation
The DVD disc emulation allows you to confirm the results of editing before recording those results to the final DVD disc. When the Disc Emulation button on the EDIT section = [Title] command is pressed, DVD menu editing, title editing and other editing results can be played back in the same form as they would be recorded on DVD disc. Following playback, the screen returns to the Function Menu.
When the FUNCTION button is pressed, the display returns to the Function Menu.
Executing the Disc Emulation command on EDIT
section = [Title]
65
En