DVD Menu Editing
Button Text
When button text is selected, use the EDIT section
=[DVD Menu] = [Menu Design] = [Button Text] command to select the format from the following choices:
Title (chapter) Number/Name Title (chapter) Number
Title (chapter) Name No text
When “Name” is selected, the name of the clip (chapter) allocated to each title will be applied. The name can be changed during title editing (see page
62, “Title Editing / Chapter Editing”).
Selecting Opening Clip
Using the [DVD Menu] = [Navigation Cmd] = [Introduction Clip] command on the Function Menu’s EDIT section, you can select the first clip to be played when a disc is inserted. Also, on the [User Operation] command, you can select operation restrictions during playback; if “Disabled” is selected, all operations during playback of the opening clip are disabled. If “Enabled” is selected, the ENTER button is enabled. The actual operation performed when the ENTER button is pressed during playback of the opening clip can be selected with the [Post Cmd] command.
Note 1:
The opening clip must be set to the same TV system as that on the menu.
Note 2:
The type of audio must be the same for both opening clip and idle clip.
Note 3:
An opening clip can be set only for HDD projects.
English
EDIT section = [DVD Menu] = [Menu Design]
=[Button Text]
EDIT section = [DVD Menu] = [Navigation Cmd]
= [Introduction Clip]
EDIT section = [DVD Menu] = [Navigation Cmd]
= [User Operation]
57