Pioneer PRV-LX10 manual Regarding Progressive Scan Output

Playing Discs

Regarding Progressive Scan Output

This unit allows the output of progressive scan video signals from the component output connector. To turn progressive scan output ON/OFF, press the controls on the front panel:

Press these buttons simultaneously.

Note 1:

Switching is only possible during idling.

Note 2:

Be sure the unit is connected to a television monitor supporting progressive-scan. Proper image reproduction will not be produced with other monitors.

Note 3:

When progressive output is ON, image signals will not be produced from output connectors other than the component output connector.

Note 4:

Some progressive scan monitors currently available do not possess complete compatibility with the PRV- LX10, with the result that some image distortion may occur. If such distortion is observed during progressive scan playback, set the PRV-LX10’s output to interlaced.

Note 5:

Progressive is supported during NTSC output only.

54

PRV-LX10 En