Pioneer PRV-LX10 manual Edit List File Format, Nnn Rec, Nnn Chp, Nnn Ini

Importing Image Data, Edit Lists

Edit List File Format

Edit list files are text files with the “.edl” filename extension. Composition is as follows:

Header:	PIONEER-DVDRec-EDL 002 ENCODING=XXX
Entry:	Number Operation Type Parameter 1 Parameter 2 Parameter 3

The number of parameters differs depending on the type of operation involved. Numbers are consecutive numerals beginning from 001.

Use a single-byte space (0x20) or tab (0x09) between [PIONEER-DVDRec-EDL] and [002]. Alternately, a carriage return character (0x0A, 0x0D0A, 0x0D) may also be used.

The message ENCODING=XXX indicates the character encoding, and may be omitted.

The “XXX” represented here supports utf8, eucJP, Shift-JIS, and JIS7. If the command is omitted, utf8 will be used as default encoding.

■IN/OUT Point Setting Entry

Number	Operation Type	Parameter 1	Parameter 2	Parameter 3
NNN	REC	IN Point	OUT Point	Post-REC action

The IN/OUT point is set using time code format as follows: HH:MM:SS:FF Post-REC action will indicate either STOP or PAUSE.

The final IN/OUT point setting entry in an edit list must always designate the post-REC action as STOP.

■Chapter Point Setting Entry

Number	Operation Type	Parameter 1
NNN	CHP	CHAPTER POINT

The chapter point is designated using time code as HH:MM:SS:FF. The chapter point description must come immediately below the IN/OUT point setting to which it is applied. Also, the Number value is given as that given to the IN/OUT point setting entry.

■DVD-RW disc initialization

Number	Operation Type
NNN	INI

Initialization can be applied only at the head of an edit list entry.

■Finalize

Number Operation Type

NNN FNL

Finalizing can be applied only as the final entry of an edit list.

■ Wait
Number	Operation Type	Parameter
NNN	WAI	Comment

The wait command can be used within a list, to designate points necessary to change a VTR tape, etc.

If a comment is input, the comment will appear in the wait dialog.

If the comment is separated by a tab (0x09), it will appear split into two lines at the point of the tab.

■Designating the Encoding Parameter

Number	Operation Type	Parameter 1	Parameter 2
NNN	SET	Rate	Filter

Rate is R:n (n= 1-32)

Filter is F:n (n= 0-16)

This setting will continue to be reflected after EDL execution.

74

PRV-LX10 En