Pioneer DVR-630H-S, DVR-530H-S manual Getting started Basic playback, Press STANDBY/ON to switch on

Page 29

Getting started

Basic playback

This section shows you how to use your recorder for playback of discs (DVD, CD, etc.), and for playback of video from the HDD. More playback features, such as repeat and program play, are covered in Playback on page 50.

Important

•Throughout this manual, the term ‘DVD’ means playback-only DVD-Video discs and DVD-R/RW. If a function is specific to a particular kind of DVD disc, it is specified.

•Some DVD-Video discs don’t allow certain playback controls to operate at certain points in the disc. This is not a malfunction.

STANDBY/ON

OPEN/CLOSE

HDDDVD

ENTER

PLAY

STOP

DVD RECORDER

04

1 Press STANDBY/ON to switch on.

Also turn on your TV and make sure that it is set to the correct video input.

2Press HDD to playback from the HDD, or DVD to play a DVD.

If playing video from the HDD, skip to step 5 below.

3 Press OPEN/CLOSE to open the disc tray.

4 Load a disc.

Load a disc with the label side facing up, using the disc tray guide to align the disc (if you’re loading a double- sided DVD-Video disc, load it with the side you want to play face down).

•If you want to play a DTS audio CD, please first read the note on page 31.

5 Press PLAY to start playback.

•If you’re playing a DVD-Video or Video CD, a disc menu may appear when you start playback. Use the

buttons and ENTER to navigate DVD disc menus, and the number buttons and ENTER for Video CD menus.

•When playing video from the HDD, playback will automatically stop after the end of a title is reached.

•See the following sections for more details on playing specific kinds of discs.

6 To stop playback, press STOP.

7When you’ve finished using the recorder, eject the disc and switch the recorder back into standby.

• To open/close the disc tray, press OPEN/CLOSE. Remove the disc before putting the recorder into standby.

•Press STANDBY/ON to switch the recorder into standby.

29

En

Image 29

Contents DVR-630H-SDVR-530H-S Risk of Electric Shock Do not Open Ventilation Caution Operating EnvironmentContents Video/Audio Adjust menu Disc Setup menuInitial Setup menu Additional informationBefore you start Chapter FeaturesBefore you start Before you start Before you start What’s in the box Putting the batteries in the remote controlUsing the remote control DVD-R/RW compatibility General disc compatibilityCD-R/RW compatibility Compressed audio compatibilityPC-created disc compatibility WMA Windows Media Audio compatibilityJpeg file compatibility Optimizing HDD performance About the internal hard disk driveConnecting up Chapter Connecting upRear panel connections Front panel connectionsConnecting up Easy connections Connecting using the component video output Connecting up Using other types of video outputConnecting using an S-video output This enables you to watch the output from this recorder This enables you to watch and record TV channelsThis enables you to record scrambled TV channels Connect RF antenna cables as shownThis enables you to watch discs This enables you to listen to multichannel surround sound.1 Connecting up Connecting to an AV amplifier or receiverConnecting up Connecting other AV sources Jpeg file storage devices Connecting up Connecting a USB devicePlugging Front panel Controls and displaysControls and displays Chapter Return Controls and displays Remote controlControls and displays Ntsc Controls and displays DisplayLP / SLP EP / SEPGetting started Chapter Switching on and setting upGetting started Enter Getting startedSelecting the hard disk or DVD for playback and recording Other settings you can makeSelect the TV screen type, ‘Wide 169’ or ‘Standard 43’ Is your TV compatible with progressive scan video?Getting started Making your first recording When you want to stop recording, pressPlaying back your recording Press REC to start recordingChanging TV channels Getting started Using the built-in TV tunerChanging audio channels NicamGetting started Basic playback Press STANDBY/ON to switch onPress HDD to playback from the HDD, or DVD to play a DVD Press OPEN/CLOSE to open the disc tray Load a discPlaying from the HDD Playing DVD discsPlaying Video CD/Super VCDs Playing CDs and WMA/MP3 discsDisplaying disc information on- screen Getting started Using the Home MenuHome Menu Home menu optionsPlay display HDD and removable disc activity displayStop display Copy protected material ! / PureCinema indicator # Total running time of title Angle indicatorRecording mode Recording displayRecording HDD Video mode compatibilityRecording Chapter About DVD recordingRestrictions on video recording Recording Recording time and picture qualityRecorded audio Recording Setting the picture quality/recording timeBasic recording from the TV Recording equipment and copyrightTo stop the recording, press Stop REC Setting a timer recordingUse the Audio button to select the audio channel to record Press Enter to set the start time Easy Timer RecordingCurrent time Recording start time After making the settings, select ‘Enter’ and press Enter Timer recording using the G-Code programming systemConfirm that the settings are correct Press Enter to set the end timeSetting a manual timer recording Code programming with the power offTo exit the timer recording screen, press Home Menu Tip Enter the timer recording settingsEditing a timer program Extending a timer recording in progressDeleting a timer program Skipping a regular timer programCanceling and stopping a timer recording in progress Timer recording FAQYou can’t enter a timer program if the clock isn’t set What happens when two or more timer programs overlap?Playback Component See Connecting up for connection optionsRecording Simultaneous recording Press REC when you’re ready to start recording Set up the recorderSee Audio In Settings on page 93 for more on these settings Automatic recording from a satellite tunerRecording Recording from a DV camcorder Also, set the camcorder to VTR modeUse Press EnterFinalizing a disc Playing your recordings on other DVD playersCan’t get my DV camcorder to work with the recorder There’s a picture, but no soundPress Home Menu and select ‘Disc Setup’ Select ‘Initialize’ Recorder’s settingInitializing a recordable DVD disc It takes about 30 seconds to initialize the discPlayback Chapter PlaybackIntroduction Navigating discs and the HDDPlayback Using the Disc Navigator to browse the contents of a discStyle Select four or eight titles per screen view Using the Disc Navigator with playback-only discsGenre Display all genres or just a selected genre PressPlaying in slow motion Playback Scanning discsSlow 1/16 Slow 1/8 Slow 1/2 ScanSearch Mode Play Mode menuPlay Mode Playback Frame advance/frame reversePlayed over and over.1 RepeatRepeat play Repeat to build up a program list Program playDisplaying and switching subtitles Switching DVD soundtracksOther Program play functions ClearSwitching camera angles Playback Switching audio channelsTo display/switch the audio channel, press Audio repeatedly To switch the camera angle, press AngleCopying and back-up Chapter Copying and back-upOne Touch Copy CopyrightCanceling One Touch Copy Using Copy ListsCopying and back-up Copying from HDD to DVDPress to display the command menu panel Command Menu panel Select VR mode or Video mode for the copySelect ‘HDD DVD’ If you select Use Existing Copy List, skip to belowSelect ‘Start Copy’ to start copying Select ‘Next’ to move on to the Title Edit screenTitle Name Copying from DVD to HDDErase Move Erase SectionSelect the type of edit Highlight the title you want to move and pressDivide PreviewCombine Chapter EditSet Thumbnail Recording ModeOption Using disc back-upBilingual Copying and back-up Editing Chapter EditingDisc Navigator screen To exit the Disc Navigator, press Home MenuVideo mode VR mode Original Play List Editing Command menu panel optionsEditing accuracy HDD genresEditing Select ‘Create’ from the command menu panelPlay Select a title to add to the Play ListUsing a USB keyboard to enter a name Using the remote key shortcuts to input a nameKey Function Key CharactersSelect ‘Exit’ to return to the Edit screen Select ‘Edit’ ‘Set Thumbnail’ from the command menu panelOK? Set Genre Use this command to assign a genre to a titleLock Select ‘Exit’ to get back to the main Disc Navigator screenSelect ‘Edit’ ‘Combine’ from the command menu panel Select ‘Genre Name’ from the command menu panelGenre Name Definable genre names, then press EnterUndo Multi-ModeUsing the Jukebox Chapter Using the JukeboxCopying CDs to the HDD Press DVD Load the CD you want to copy to the HDDSelecting a track from an album to play Using the Jukebox Playing music from the JukeboxEditing Jukebox albums Changing the album view Using the JukeboxSort order GenrePhoto Viewer Chapter Photo ViewerLocating Jpeg picture files Currently selected thumbnailImporting files to the HDD Photo Viewer Playing a slideshowReloading files from a disc or USB device Zooming the imageSelecting multiple files or folders Photo ViewerCopying files to a DVD-R/RW Copying selected files to a DVD-R/RW Editing files on the HDDCreating a new folder ErasingCopying NamingLocking/Unlocking Select ‘Erase’ or ‘Erase Folder’Photo Viewer Printing files Once printing has started, you can cancel by pressing EnterSelect the files you want to print Select ‘Print’ from the menuDisc Setup menu Chapter Disc Setup menuBasic settings Input Disc NameFinalize settings1 Disc Setup menu Initialize settingsOptimize HDD Initialize HDDVideo/Audio Adjust menu Chapter Video/Audio Adjust menuSetting the picture quality for TV and external inputs Choosing a presetSelect the picture quality setting you want to adjust Video/Audio Adjust menuSetting the picture quality for disc playback ‘Max’ Audio DRCInitial Setup menu Chapter Initial Setup menuUsing the Initial Setup menu Setting Options ExplanationInitial Setup menu Mpeg PCM MpegAudio Language English Language Settings OSD Language EnglishOther Auto LanguageVideo Mode DVD-RW Auto Init VR ModeVideo Mode Off Video Mode OnUSB Selecting other languages for language options Additional information about the TV system settingsAdditional information about component video output Setting up the remote to control your Resetting the recorderUsing the TV remote control buttons Additional informationAdditional information Screen sizes and disc formats When viewing on a standard TV or monitorWhen viewing on a widescreen TV or monitor SLP Additional information Minimum copying timesSEP General Additional information TroubleshootingProblem Remedy Additional information Can’t use One Touch Copy HDD to DVD ProblemCan’t use One Touch Copy DVD to HDD Device connected to the USB port isn’t recognizedHow do I make a high-quality copy? Additional information Frequently asked questionsDV-related messages Additional information About DVAdditional information Manual recording modes Video mode On HDDVR mode DVD Video mode DVD Resolution Level Country/Area code list Additional information Language code listLanguage Language code letter, Language code Country/Area, Country/Area code, Code letterMessage Explanation/Action Message Additional information Handling discs Cleaning the pickup lensCondensation Storing discsMoving the recorder Additional information Hints on installationGlossary Mpeg video DRM Digital Rights Management Mpeg audioDynamic range Exif Exchangeable Image FileSpecifications Timer Supplied accessoriesTuner Input/OutputLanguage audio 57, 95 code list 108 DVD menu Connecting 12, 18 error messages 106 recording fromIndex From HDD to DVD 60, 60-62,101 high-speed59, 66USB 12, 19, 72, 81, 82, 86, 104 NtscVRB1383-A Pioneer Corporation