Video/Audio Adjust menu | Pioneer DVR-530H-S, DVR-630H-S manual

12The Video/Audio Adjust menu

•Gamma Correction – Adjusts the brightness of darker images.

•Hue – Adjusts overall balance between red and green.

•Chroma Level – Adjusts how rich the colors appear.

4 Use the buttons to adjust the currently selected picture quality setting.

5When you have all the settings as you want them, press HOME MENU to exit.

You can now use the preset for any other input or the built-in TV tuner.

Tip

Creating your own set

There are three user presets in which you can save your own set of picture quality settings for disc playback.

1Follow Choosing a preset above and select one of the user presets (Memory 1, 2 or 3).

2Move the cursor down and select ‘Detailed Settings’.

Memory1

Detailed Settings

3Select the picture quality setting you want to adjust.

•To see more of the picture as you adjust different settings, press ENTER after selecting the setting you want to adjust.

Setting the picture quality for disc playback

This setting determines how the picture will look when playing discs.

Memory1
Prog. Motion		Motion
PureCinma
YNR		Off
BNR		Off
Detail		Off
White	Level	Min
Black	Level	Min

Still

Auto1

Max

Choosing a preset

1With a disc playing (or paused), press HOME MENU and select ‘Video/Audio Adjust’.

2Select ‘Video Adjust’

3 Use the

buttons to change the setting.

TV(CRT)

Detailed Settings

There are six presets available:

•TV(CRT) – suitable for standard cathode-ray tube TVs

•PDP – suitable for plasma display screens

•Professional – suitable for professional monitors

•Memory1 – user preset 1

•Memory2 – user preset 2

•Memory3 – user preset 3

You can press DISPLAY to see the individual settings for the current preset (TV(CRT), PDP or Professional).

4 Press ENTER to select the preset.

You can adjust the following settings:

•Prog. Motion – Adjusts the motion and still picture quality when video output is set to progressive.

•PureCinema – This setting optimizes the picture for film material when the video output is set to progressive. Usually this is best left set to

Auto 1; try switching to Auto 2, On or Off if the picture appears unnatural.

•YNR – Adjusts the amount of noise reduction (NR) applied to the Y (brightness) component.

•BNR – Adjusts the amount of noise reduction (NR) applied to the block noise (artefacts visible in areas of flat color, caused by MPEG compression).

•Detail – Adjusts how sharp edges appear.

•White Level – Adjusts the intensity of white.

•Black Level – Adjusts the intensity of black.

•Black Setup – Corrects the standard reference black level (NTSC video playback only).

•Gamma Correction – Adjusts the brightness of darker images.

•Hue – Adjusts overall balance between red and green.

•Chroma Level – Adjusts how rich the colours appear.