Pioneer DVR-630H-S, DVR-530H-S manual Easy Timer Recording, Current time Recording start time

Recording 05

•The timer indicator ( ) lights in the front panel display when the timer is active. If the indicator is blinking it means that (for a DVD timer recording) there is no disc loaded, or the disc loaded is not recordable (for an HDD timer recording it means that the HDD is not recordable).

•Approximately two minutes before a timer recording is set to start, the recorder will go into timer recording standby. In timer recording standby you cannot use some functions.

•The maximum length for timer recordings made to the HDD is 24 hours. However, because one title (HDD) is limited to 12 hours, recordings over 12 hours will be spread over two titles. Note that there will be a break in the recording of a few seconds between titles.

Easy Timer Recording

As the name suggests, Easy Timer Recording makes setting up a timer recording as simple as possible.

HDDDVD

CH

	ENTER
HOME
MENU	RETURN

REV SCAN FWD SCAN

REC MODE

1Press HOME MENU and select ‘Timer Recording’ then ‘Easy Timer’.

2Set the TV channel and recording quality.

Easy Timer Recording
8:00	9:00	10:00	11:00	12:00	13:00	14:00
1/01
2/01
3/01
SAT	1/01		9:30	–	––:––
CHANNEL +/–	Pr 7	REC MODE		SP	HDD/DVD	HDD

•Use the CH +/– buttons to set the channel you want to record.

•Use the REC MODE button to set the recording quality. Press repeatedly to switch between XP, SP, LP, EP, SLP, SEP and AUTO (and MN if manual recording mode is on).

•DVD recording: The AUTO option automatically sets the best recording quality for the space available on the disc loaded at the time of recording.

•HDD recording: The AUTO option automatically sets the best recording quality that would fit on to a blank DVD disc.

•Press DVD to record to DVD disc, or HDD if you want to record to the hard disk drive.

3 Useto move the cursor to the recording start date and time on the grid.

• You can move the cursor forward or back an hour at

a time using the and buttons.

Current time

Recording start time

Easy Timer Recording
8:00	9:00	10:00	11:00	12:00	13:00	14:00
1/01
2/01
3/01
SAT	1/01	11:45		–	––:––
CHANNEL +/–	Pr 7	REC MODE		SP	HDD/DVD	HDD

Each row of the grid is one day (you can set the timer recording for up to a month in advance). Each column is a 15 minute interval.

The darker area represents time that has already passed and can’t therefore be selected. The lighter area is time that’s available.

4 Press ENTER to set the start time.

The start date and time is displayed in the middle of the screen.

•You can go back and reset the start time if you need to by pressing RETURN.

39

En