Pioneer VSX-D811S, VSX-D711 Before you start Checking what’s in the box, Installing the receiver

01Before you start

Checking what’s in the box

Please check that you've received the following supplied accessories:

•AM loop antenna

•FM wire antenna

•Dry cell batteries x 2 (AA size IEC R6P)

•Remote control

•These operating instructions

Installing the receiver

Please note the following points:

•Do not place objects

directly on top of this unit. This prevents proper heat dispersal.

•When installing on a

rack, shelf, etc., be sure to leave more than 8 inches (20 cm.) of space above the receiver.

Making cable connections

Make sure not to bend the cables

over the top of this unit (as shown in

the illustration). If this happens, the magnetic field produced by the transform-

ers in this unit may cause a humming noise from the speakers.

Loading the batteries

6		Dry cell batteries x 2 (AA size IEC R6P)
	En
	XRB3013A.01.06	6

Incorrect use of batteries may result in such hazards as leakage and bursting. Observe the following precautions:

•Never use new and old batteries together.

•Insert the plus and minus sides of the batteries properly according to the marks in the battery case.

•Batteries with the same shape may have different voltages. Do not use different batteries together.

•When disposing of used batteries, please comply with governmental regulations or environmental public instruction’s rules that apply in your country or area.

Operating range of remote control unit

The remote control may not work properly if:

•There are obstacles between the remote control and the receiver's remote sensor.

•Direct sunlight or fluorescent light is shining onto the remote sensor.

•The receiver is located near a device that is emitting infrared rays.

•The receiver is operated simultaneously with another infrared remote control unit.

30

30

23ft (7m)

01.12.12, 4:41 PM