Pioneer VSX-D711 manual Playing sources, Advanced Surround modes, Sources with stereo surround

Page 33

Playing sources

05

Advanced Surround modes

These are designed to be used with multi- channel surround sound audio/visual sources (like DVDs and LDs). Most Advanced Surround modes are designed to be used with film soundtracks, but some modes are also suited for music sources. Try different settings with various soundtracks to see which you like.

Depending on the source, the 6.1 channel setting (page 40), and the sound mode you have selected, you may not get sound from the surround back speakers in your setup. For more on this, refer to the table below.

Virtual Surround Back (VIRTL SB)

The Virtual Surround Back effect simulates 7.1 surround channel listening, giving the impres- sion that there are two surround back speakers in your system when listening to a 5.1 channel source.

Expanded

This mode is especially designed to give sound depth to stereo sources, and lets you hear two- channel (stereo) signals as simulated multi- channel surround sound. Use with Dolby Pro Logic for a stereo surround effect. You can also use with Dolby Digital sources for a wider stereo field than the Standard modes.

Movie

Simulates the relaxed environment of a movie theater, and is suitable for watching movies.

5-Channel Stereo (VSX-D711)

This can be selected to give multi-channel sound to a stereo source, using all of the speakers in your setup.

Music

Simulates the acoustic environment of a large concert hall and is suitable for music or musical sources.

6-Channel Stereo (VSX-D811S)

This can be selected to give multi-channel sound to a stereo source, using all of the speakers in your setup.

Type of source

6.1 ch.

Standard

Advanced

Virtual SB

Expanded

6 Ch.

 

setting

 

Movie/Music

 

 

Stereo

 

 

 

 

 

 

 

DTS-ES/Dolby Digital Matrix encoded

Auto

 

 

 

 

 

 

multi-channel sources with 6.1 surround

Fix

 

 

 

 

 

 

 

 

Dolby Digital/DTS encoded multi-channel

Auto

 

 

 

 

sources with stereo surround

Fix

 

 

 

 

 

 

 

 

Dolby Digital/DTS encoded multi-channel

Auto

 

 

 

 

sources with mono surround, Stereo sources

Fix

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Analog 2-channel (stereo) source

Auto

 

 

 

 

 

Fix

 

 

 

 

 

 

 

 

 

 

The checkmark () indicates when sound will be output from the surround back speaker(s).

See the 6.1 channel setting on page 40 to select between AUTO or FIX.

33

En

XRB3013A.32.37

33

01.12.12, 4:44 PM

Image 33
Contents VSX-D711 VSX-D811S Important Notice XRB3013A.01.06 01.12.12, 441 PM Contents Making a recording Operating range of remote control unit Installing the receiverBefore you start Checking what’s in the box Making cable connectionsMinute guide Introduction to home theater 02 5 minute guide Listening to Surround Sound Hook up your DVD playerHook up your TV Connect your speakers Minute guideSBL SBR 02 5 minute guidePlay a DVD, and adjust the volume to your liking Press Quick Setup 02 5 minute guide Using the Quick Setup1ch 0chAudio/Video cords Connecting upVideo cables Component video cordsVSX-D711 Connecting up Connecting digital componentsVSX-D811S CD player Connecting up Connecting audio componentsVideo Connecting up Connecting DVD 5.1 channel componentsConnecting to the front panel video terminal Connecting up Connecting video componentsConnecting up Connecting antennas FM wire antennaAM loop antenna Connecting up Connecting the speakers VSX-D711 Connecting up Connecting the speakers VSX-D811S To 16 ΩBe sure to complete Hints on speaker placement Speaker terminalsB speaker systems View of speaker set up VSX-D811S VSX-D811S only Connecting up Connecting additional amplifiersOperating other Pioneer components Connecting up AC outletAppliance to this Units AC Outlet Control OUT terminalControls and Displays Front panel Master VolumeSTANDBY/ON EnterDisplay Controls and DisplaysDTS AnalogPRO Logic ATTSource Controls and Displays Remote controlRCV DISPLAY/DISC EnterDTV ON/OFF DTV InfoDTV Menu TOP MenuMute TV Volume +TV Input LED DisplayStandard mode Playing sources Introduction to Sound ModesStereo/Direct Advanced Surround modes Playing sourcesSources with stereo surround Analog 2-channel stereo sourceListening to multi-channel playback Playing sources Choosing the input signalUsing Advanced Surround Using Stereo/DirectNEO6 Start playback of the component you selected in stepUsing the tone controls Playing sources Using Loudness and Midnight listeningPlaying other sources TrebleDVD Playing sources Selecting the multi-channel analog inputsSetting up the receiver Choosing your receiver setup Speaker setting Setting up the receiverFL-C FS-CS-S FL-CS-SFL-CL-SL FL-CS-SS FL-CL-SS FL-CS-SL FL-CL-SChannel setting Surround back speaker settingSubwoofer setting Crossover frequency settingLFE attenuator setting Center speaker distance settingFront speaker distance setting Surround speaker distance set- tingDynamic range control setting Surround back speaker distance settingDual mono setting Component video input settingsCoaxial digital input settings Surround back channel input settingOptical digital input settings SB 2ch Use ’ or ‘ to select SB 2ch in or SB 1chUse Level +/- to adjust the speaker levels in turn Setting the relative volume level of each channelWhen you’re done, press Test Tone to turn off the test tone FL C FR SW SL SBUsing the tuner Listening to the radio Tuning directly to a stationImproving FM stereo sound Saving station presets Using the tunerTune to a station you want to memo Rize Press T.EDIT Tuner EditListening to station presets Using the tuner Naming station presetsChoose the station preset you want to name Input the name you wantMonitoring your recording Making Recordings Making an audio or a video recordingSelecting preset codes directly Setting the remote to control other componentsProgramming signals from other remote controls Searching for preset codesSwitch on the component you want to control Press Remote Setup and hold for three secondsClearing all the remote control settings Erasing one of the remote control button settingsPrepare the remote to erase the button setting Press and hold the button to be erased for three secondsDirect function Confirming preset codesChannel Controlling the rest of your system Controls for TVsTV VOL SUB TitleControls for other components Controlling the rest of your systemDisplay MenuEnter Channel Manufacturer Code Controlling the rest of your system Preset Code List1013, 1019, 1026, 1027 1055, 1086, 10891032, 1063 1036, 1086 10961013, 1019 11141017, 1032, 1089 10141006, 1079 10591132 1055, 1073MD Player LD PlayerCD Player DVD Player Tape DeckAmplifier Misc AudioReceivers VCR 2015, 2042 2015, 2027, 20322017, 2018, 2053 2001, 2017, 2034, 2059 2062, 2085, 2087Satellite Tuner 4008 40154005 4034Cable TV Adjust the Master Volume Additional information TroubleshootingPlace the antenna farther away from the equipment causing ReceiverFront panel refer to Additional informationRemove the obstacle or operate from another position LightAmplifier Section Additional information SpecificationsVideo Section FM Tuner SectionFurnished Parts MiscellaneousWe Want You Listening For a Lifetime Additional information Additional information Additional information TNGZF/01L00001 Printed XRB3013-A 0 4 2 1 1 4 0