Basic Adjustment Settings | 09 |
Setting for skipping unwanted channels
From among digital TV channels searched and set up using Auto Channel Preset, you can select channels to be skipped when CH +/– are operated.
1Press HOME MENU.
2Press 
/
to select “DTV Setup”, and then press
ENTER.
3Press 
/
to select “DTV Channel Setup”, and then press ENTER.
4Press 
/
to select “Channel Add/Del”, and then press ENTER.
5Press 
/
to select “Channel”.
6Press 
/
to select a channel to be skipped.
7Press 
/
to select “Add/Delete”.
8Press 
/
to select “Delete”.
Checking signal strength
When watching a digital TV program, you can check its current signal strength.
1Press HOME MENU.
2Press 
/
to select “DTV Setup”, and then press
ENTER.
3Press 
/
to select “DTV Channel Setup”, and then press ENTER.
4Press 
/
to select “Signal Strength”, and then press ENTER.
•Adjust the direction of the antenna so that the current signal strength reaches as close to the maximum signal strength as possible.
5Press HOME MENU to exit the menu.
English
9Press HOME MENU to exit the menu.
•To restore skipped channels, use the above procedure except that you select “Add” in step 8.
45
En
45 | 7/24/03, 1:59 PM |