Useful Adjustment Settings
Adjusting image positions (AV mode only)
Adjust the horizontal and vertical positions of images on the Plasma Display.
1Press HOME MENU.
2Press 
/
to select “Option”, and then press
ENTER.
3Press 
/
to select “Position”, and then press
ENTER.
4Press 
/
to select “H/V Position Adjust”, and then press ENTER.
5Press 
/
to adjust the vertical position or press 
/
to adjust the horizontal position.
6Press HOME MENU to exit the menu.
•To restore the factory defaults for all the items, press 
/
to select “Reset” in step 4, and then press ENTER. A confirmation screen appears. Press 
/
to select “Yes”, and then press ENTER.
•Adjustments are stored separately according to input source.
Adjusting image positions and clock automatically (PC mode only)
Use Auto Setup to automatically adjust positions and clock of images coming from a personal computer.
1Press HOME MENU.
2Press 
/
to select “Option”, and then press
ENTER.
3Press 
/
to select “Auto Setup”, and then press
ENTER.
• Auto Setup starts.
4Press HOME MENU to exit the menu.
•When Auto Setup is finished, “Auto Setup com- pleted.” appears.
•Even when “Auto Setup completed.” appears, Auto Setup may have failed, depending on conditions.
•Auto Setup may fail with a PC image composed of similar patterns or monochrome. If not successful, change the PC image and try again.
•Be sure to connect the computer to the Media Receiver and switch it on before starting Auto Setup.
12
English
81
En
81 | 7/24/03, 2:01 PM |